Hi all,
I have installed xen on my linux computer ... and started, on this
computer, a xen virtual machine on windows ...
iked works very well ... creating a tap0 connection, when I want to use
an IPSec connection
My windows VM can go on the web ... no problem !
So, what's wrong ?
When I want my VM Windows use the "tap0" IPSec connection ... I does
not work !
I can't join any computer on the other side of the IPSec connection ...
althougth I do it on linux.
Please find my configuration :
=================================================
moua@SPE-FIXE:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet manual
auto xenbr0
iface xenbr0 inet dhcp
bridge_ports eth0
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
=================================================
moua@SPE-FIXE:~$ route -n
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 192.168.1.254 0.0.0.0 UG 1 0 0 xenbr0
95.141.100.6 192.168.1.254 255.255.255.255 UGH 0 0 0 xenbr0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 xenbr0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 xenbr0
192.168.35.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0
192.168.201.0 192.168.35.64 255.255.255.0 UG 0 0 0 tap0
==================================================
When I try to ping the ip 192.168.201.88 from the windows machine, it
does not work
First, I don't understand why the default route is on the first line ...
Could it be the problem ?
Any idea that could fix the problem ?
Thanks a lot for your help
Stéphane
_______________________________________________
vpn-help mailing list
[email protected]
https://lists.shrew.net/mailman/listinfo/vpn-help
