I'm having difficulty getting the VPN client to work in our virtual environment. This configuration works without an issue in our physical environment. This is a VMware Virtual Machine with Windows 7 64 bit OS.
VPN Client 2.1.7 (tried 2.2.2 as well with the same result) Connect log is as follows Configuring Client Settings... attached to key daemon... peer configured iskamp proposal configured esp proposal configured client configured local id configured pre-shared key configured bringing up tunnel ... negotiation timeout occurred tunnel disabled detached from key daemon... There were a few similar threads that either didn't show the resolution or the resolution didn't work for me. Two of the resolutions that didn't work that I tried were. 1. Turned off Shrew Soft Lightweight Filter in the Local Area Connection properties 2 Disabled ShreSoft DNS Proxy Daemon Services in Windows Services Manager We did find that another VPN client (NCP) does work on the same VM so we know that network wise traffic seems to be flowing appropriately. Attached is a wireshark capture that myself and our central IT used to try to narrow down the issue. Any assistance will be appreciated. John Roe Systems Development & Support MSU Human Resource 517-884-0218 [email protected] [MSU--HR-Wordmark-Green.jpg]
Wiresharkcapture.pcapng
Description: Wiresharkcapture.pcapng
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
