Hi Jan, Don't forget to add list also.
for log, you can look : https://www.shrew.net/support/VPN_Bug_Report_Windows but i think there is a mistake somewhere about login/password... (not missing domain stuff ?) Regards, On Thu, Oct 15, 2015 at 12:15 PM, Jan de Vries <[email protected]> wrote: > Hello Alexis, > > > > Thanks for replying. > > > > When trying to connect, this is shown in the login window: > > attached to key daemon ... > > peer configured > > iskamp proposal configured > > esp proposal configured > > client configured > > local id configured > > remote id configured > > pre-shared key configured > > bringing up tunnel ... > > user authentication error > > tunnel disabled > > detached from key daemon > > > > PW and User name are 100% correct. > > > > Where to find the Shrew Soft VPN Log? > > I don’t have access to the Cisco logs these are with the Telco. > > What about the ‘Policy Generation settings’? What is that, and > > where to find? > > > > Best regards, > > > > Jan de Vries > > > > *Van:* [email protected] [mailto:[email protected]] *Namens *Alexis La > Goutte > *Verzonden:* donderdag 15 oktober 2015 12:08 > *Aan:* Jan de Vries > *CC:* [email protected] > *Onderwerp:* Re: [vpn-help] Copying Shrew VPN Client profile to another > Windows profile (because of Domain Server rebuild....) > > > > Hi, > > Do you have check the Shrew soft VPN (and Cisco) logs ? what it is say ? > > Do you have check Policy Generation settings ? > > Regards, > > > > On Wed, Oct 14, 2015 at 9:06 PM, Jan de Vries <[email protected]> > wrote: > > Hi, > > > > I’m new to the Shrew VPN Client Support. > > Installed the product 5-6 months ago on Win8 x64 to Cisco environment. > > Worked like a charm, after some fiddling with the settings, from day 1 > until …. > > I had to rebuild the Windows Domain Server in the office (due to weird DNS > issues) > > As such I had to re-enter the Windows Domain again from this Workstation > and then > > the problems started. > > > > I looked up the file structure of Shrew Soft VPN and copied this to the > same location > > in the new User profile. The configuration file was unchanged but I’m > unable to > > connect again to the same Cisco. > > > > So somewhere something is stored I don’t know. > > Stuff was legally bought and paid for. Reinstallation then forces the > contract obligations > > and I expect that the software (haven’t tried) will lift its index finger > to me…;-) > > > > I’ve looked around in doc, nothing there for this situation. > > Als not in the VPN Client help archives. > > Therefore the question how to do it in a proper way. > > I need the software rapidly again, used for downloading customer CDR’s > from the Telco. > > > > Thanks in advance for any help offered. > > It is evening now in the Netherlands so I might reply tomorrow. > > > > Thx, > > > > Jan > > > _______________________________________________ > vpn-help mailing list > [email protected] > https://lists.shrew.net/mailman/listinfo/vpn-help > > >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
