Hello, Peter I know that 192.168.111.250 is LAN IP of my remote server (in office network). I use ShrewVPN from my home. I have a lot of RDP servers and I don't want to port forward they all. That why I need VPN solution.
I guess you had not understood this issue. See below: > "ShewVPN" + "Remote Desktop App" + "LAN IP of remote RDP-server" = *ISSUE* > (cannot connect). > "ShewVPN" + "RDP-client (mstsc)" + "LAN IP of remote RDP-server" = * OK*. > > "Remote Desktop App" + "WAN IP of remote RDP-server" = * OK*. > "RDP-client (mstsc)" + "WAN IP of remote RDP-server" = * OK*. > Classic RDP client (mstsc) and Remote Desktop app use the same TCP port 3389. When I try Remote Desktop App through ShrewVPN I don't see any attempts on my Cisco PIX debug logs. Classic RDP client does footsteps in Cisco logs. I hope you can make conclusion from information above issue in ShrewVPN software. Debug logs: https://blancos.info/debug.zip <https://blancos.info/debug.zip> Thank you for your response! -- Best regards, Yury 2018-06-17 1:33 GMT+03:00 Peter Steiner <[email protected]>: > That is a LAN IP not WAN IP. > > check firewall forwarding rule if trying wan ip > > be sure outside port on firewall is forwarded to internal port for your ip > > recommend using a high port number on wan facing side of router like > 63389 then route to 3389 of lan ip > > remember cisco u create a rule for service ports than the forwarding rule > > u dont need vpn on LAN in majority of cases > > hth > > V/R, > ~Peter > > > -----Original Message----- > From: Yury Kolos <[email protected]> > To: [email protected] > Sent: Sat, 16 Jun 2018 11:03 AM > Subject: [vpn-help] Win10 RemoteDesktop App cannot connect through ShrewVPN > > Hello, it's very strange issue. > > I cannot use new Remote Desktop App in Windows 10 for connecting to remote > servers when Shrew Soft VPN is active. > > > In the same time I can use classic RDP-client (mstsc) without problems. > >> telnet 192.168.111.250 3389 >> > works as well. > > When I try to use Remote Desktop App for connecting to remote servers > without VPN (to NATed public address of the same RDP-server) everything > working fine. > > *My environment*: > >> VPN Client Version = 2.2.2 >> Windows OS Version = Windows 10 1803 64-bit >> Gateway Make/Model = Cisco PIX 515 >> Gateway OS Version = 8.0.4(28) >> >> Remote Desktop App = 10.1.1042.0. >> RDP-server private IP: 192.168.111.250 >> > > I can send debug files if needed. > > Could you please help me to fix the issue? > > -- > Best regards, Yury > Skype: y.kazakevich > >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
