Hi all,
I'm trying to setup bonding in mode 1 (
http://dpdk.org/doc/guides/prog_guide/link_bonding_poll_mode_drv_lib.html)
with this config:
dpdk {
dev 0000:08:00.0
dev 0000:09:00.0
vdev eth_bond0,mode=1,slave=0000:08:00.0,primary=0000:09:00.0
}
Nothing comes up with *show error:*
vpp# show error
Count Node Reason
*show hardware output:*
Name Idx Link Hardware
GigabitEthernet8/0/0 1 down GigabitEthernet8/0/0
Ethernet address 00:03:a2:0a:27:fb
Intel e1000
carrier down
rx queues 1, rx desc 1024, tx queues 1, tx desc 1024
GigabitEthernet9/0/0 2 down GigabitEthernet9/0/0
Ethernet address 00:06:a3:0a:27:fc
Intel e1000
carrier down
rx queues 1, rx desc 1024, tx queues 1, tx desc 1024
UnknownEthernet2 3 down UnknownEthernet2
Ethernet address 00:00:00:00:00:00
### UNKNOWN ###
carrier down
rx queues 1, rx desc 1024, tx queues 1, tx desc 1024
cpu socket 0
local0 0 down local0
local
*show pci output:*
Address Sock VID:PID Link Speed Driver Product Name
Vital Product Data
0000:00:14.0 8086:1f41 unknown igb
0000:00:14.1 8086:1f41 unknown igb
0000:00:14.2 8086:1f41 unknown igb
0000:00:14.3 8086:1f41 unknown igb
0000:08:00.0 8086:1539 2.5 GT/s x1 uio_pci_generic
0000:09:00.0 8086:1539 2.5 GT/s x1 uio_pci_generic
*show int output:*
Name Idx State Counter
Count
GigabitEthernet8/0/0 1 down
GigabitEthernet9/0/0 2 down
UnknownEthernet2 3 down
local0
*/var/log/syslog output: *
Mar 30 16:51:43 vppbox vpp[1599]: EAL: Detected 4 lcore(s)
Mar 30 16:51:43 vppbox vpp[1599]: EAL: Probing VFIO support...
Mar 30 16:51:43 vppbox vnet[1599]: EAL: Probing VFIO support...
Mar 30 16:51:44 vppbox vpp[1599]: EAL: PCI device 0000:08:00.0 on NUMA
socket -1
Mar 30 16:51:44 vppbox vpp[1599]: EAL: probe driver: 8086:1539
net_e1000_igb
Mar 30 16:51:44 vppbox vnet[1599]: EAL: PCI device 0000:08:00.0 on NUMA
socket -1
Mar 30 16:51:44 vppbox vnet[1599]: EAL: probe driver: 8086:1539
net_e1000_igb
Mar 30 16:51:44 vppbox vpp[1599]: EAL: PCI device 0000:09:00.0 on NUMA
socket -1
Mar 30 16:51:44 vppbox vpp[1599]: EAL: probe driver: 8086:1539
net_e1000_igb
Mar 30 16:51:44 vppbox vnet[1599]: EAL: PCI device 0000:09:00.0 on NUMA
socket -1
Mar 30 16:51:44 vppbox vnet[1599]: EAL: probe driver: 8086:1539
net_e1000_igb
Mar 30 16:51:44 vppbox vpp[1599]: EAL: Initializing pmd_bond for eth_bond0
Mar 30 16:51:44 vppbox vnet[1599]: EAL: Initializing pmd_bond for eth_bond0
Mar 30 16:51:44 vppbox vpp[1599]: EAL: Create bonded device eth_bond0 on
port 2 in mode 1 on socket 0.
Mar 30 16:51:44 vppbox vnet[1599]: EAL: Create bonded device eth_bond0 on
port 2 in mode 1 on socket 0.
Mar 30 16:51:44 vppbox vpp[1599]: /usr/bin/vpp[1599]: dpdk_lib_init:309:
DPDK drivers found 3 ports...
Mar 30 16:51:44 vppbox /usr/bin/vpp[1599]: dpdk_lib_init:309: DPDK drivers
found 3 ports...
Mar 30 16:51:44 vppbox vpp[1599]: /usr/bin/vpp[1599]:
dpdk_ipsec_process:241: DPDK Cryptodev support is disabled, default to
OpenSSL IPsec
Mar 30 16:51:44 vppbox /usr/bin/vpp[1599]: dpdk_ipsec_process:241: DPDK
Cryptodev support is disabled, default to OpenSSL IPsec
Mar 30 16:51:46 vppbox vpp[1599]: /usr/bin/vpp[1599]: unknown input `
Mar 30 16:51:46 vppbox /usr/bin/vpp[1599]: unknown input `
I just have an empty config right now, *output of /tmp/vpp.log:*
2017/ 3/30 16:32:44:952: ***** Start: PID 1135 *****
2017/ 3/30 16:32:46:968: ***** Startup Config *****
2017/ 3/30 16:32:46:968: ***** End Startup Config *****
2017/ 3/30 16:51:44:780: ***** Start: PID 1599 *****
2017/ 3/30 16:51:46:786: ***** Startup Config *****
2017/ 3/30 16:51:46:787: ***** End Startup Config *****
I came across this similar issue(https://jira.fd.io/browse/VPP-614) which
was closed after turning iommu on, I did that to no avail:
GRUB_CMDLINE_LINUX_DEFAULT="iommu=pt intel_iommu=on"
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
