Hi Sadegh, As Ole says, VPP does not support MPLS-TE the control plane protocol (i.e. signalling and configuration). However, VPP does support MPLS tunnels and cross-connects that a control plane could use to realise an MPLS-TE data-plane. Fast-reroute/failover mechanisms are not supported.
Hth, neale -----Original Message----- From: <vpp-dev@lists.fd.io> on behalf of Ole Troan <otr...@employees.org> Date: Thursday, 5 April 2018 at 08:51 To: <vpp-dev@lists.fd.io> Cc: <vpp-dev@lists.fd.io> Subject: Re: [vpp-dev] MPLS-TE in VPP Hi Sadegh, > I asked a question about RSVP-TE and MPLS-TE supporting in VPP and didn't receive any answer. > > is there any forum or slack channel about VPP that I can ask my question there? > I just want to know whether VPP supports MPLS-TE and RSVP-TE or not. As far as I know there is no MPLS TE supported. You should be able to do traffic engineering with the set of Segment Routing features (SR). Those are supported both with MPLS and IPv6 transports. Cheers, Ole -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#8804): https://lists.fd.io/g/vpp-dev/message/8804 View All Messages In Topic (3): https://lists.fd.io/g/vpp-dev/topic/16774982 Mute This Topic: https://lists.fd.io/mt/16774982/21656 New Topic: https://lists.fd.io/g/vpp-dev/post Change Your Subscription: https://lists.fd.io/g/vpp-dev/editsub/21656 Group Home: https://lists.fd.io/g/vpp-dev Contact Group Owner: vpp-dev+ow...@lists.fd.io Terms of Service: https://lists.fd.io/static/tos Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub -=-=-=-=-=-=-=-=-=-=-=-