VPP can detect all PCI devices but it will not grab it (even when white list in the startup.conf is empty) unless the interface is admin down Regards Avi
From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of Jit Mehta Sent: Thursday, 03 May, 2018 6:02 AM To: vpp-dev@lists.fd.io Subject: [vpp-dev] hardware-interfaces not seen inside VPP Hello, I see that my physical nic highlighted below is seen by vpp but somehow I do not see corresponding hardware interface TenGigabitEthernet9/0/0 in "show hardware-interfaces". How do I create this interface in VPP? Thanks, Jit vpp# show pci Address Sock VID:PID Link Speed Driver Product Name Vital Product Data 0000:01:00.0 0 8086:1521 5.0 GT/s x4 igb Cisco I350-TX 1Gig LOM PN: I350-TX V0: 0x 31 2e 36 2e 33 2d 32 2e ... MN: 1137 RV: 0x be 0000:01:00.1 0 8086:1521 5.0 GT/s x4 igb Cisco I350-TX 1Gig LOM PN: I350-TX V0: 0x 31 2e 36 2e 33 2d 32 2e ... MN: 1137 RV: 0x be 0000:09:00.0 0 1137:0043 5.0 GT/s x16 uio_pci_generic 0000:0a:00.0 0 1137:0043 5.0 GT/s x16 enic 0000:0e:00.0 0 8086:10fb 5.0 GT/s x8 ixgbe 0000:0e:00.1 0 8086:10fb 5.0 GT/s x8 ixgbe 0000:81:00.0 1 14e4:d802 8.0 GT/s x8 0000:81:00.1 1 14e4:d802 8.0 GT/s x8 0000:81:00.2 1 14e4:d802 8.0 GT/s x8 0000:81:00.3 1 14e4:d802 8.0 GT/s x8 vpp# show hardware-interfaces Name Idx Link Hardware local0 0 down local0 local
