Dear all,


Let me ask about the classify function.



For incoming packets from GE0/5/0 interface at vpp-1 in attached png, I'd like 
to do below:

1. apply the rate limit by Policer,

2. then, apply the policy based routing by ACL and packets are sent to vpp-3 
directly.

(packets which source address is not 192.168.1.5 go to vpp-2.)



When I've executed the following commands, ping is not successful.

Is there any idea to do them at the same interface?



vat# acl_add_replace ipv4 permit

vpp# classify table mask l3 ip4 src

vpp# classify session acl-hit-next 1 table-index 0 match l3 ip4 src 192.168.1.5 
action set-ip4-fib-id 3

vpp# set interface input acl intfc GigabitEthernet0/5/0 ip4-table 0

vpp# configure policer name policy001 cir 30 cb 375 rate kbps round down type 
1r2c conform-action transmit exceed-action drop

vpp# set policer classify interface GigabitEthernet0/5/0 ip4-table 0

vpp# classify session policer-hit-next policy001 table-index 0 match l3 ip4 src 
192.168.1.5





Just in case, ping is successful when I apply only policy based routing or only 
policer as below.



- only policy based routing

vat# acl_add_replace ipv4 permit

vpp# classify table mask l3 ip4 src

vpp# classify session acl-hit-next 1 table-index 0 match l3 ip4 src 192.168.1.5 
action set-ip4-fib-id 3

vpp# set interface input acl intfc GigabitEthernet0/5/0 ip4-table 0



- only policer

vpp# configure policer name policy001 cir 30 cb 375 rate kbps round down type 
1r2c conform-action transmit exceed-action drop

vpp# classify table mask l3 ip4 src

vpp# classify session policer-hit-next policy001 table-index 0 match l3 ip4 src 
192.168.1.5 action set-ip4-fib-id 3

vpp# set policer classify interface GigabitEthernet0/5/0 ip4-table 0





Thank you in advance.



Best regards,

Teshigawara



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#9676): https://lists.fd.io/g/vpp-dev/message/9676
Mute This Topic: https://lists.fd.io/mt/22568325/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to