Hi Shwetha,
I found that dump message has something strange.
I configured my system at "trace-tsp 2 (microseconds)". But dump was followings.
[0] ttl 0xfc node id 0x4 ts 0x4c5470ee
[1] ttl 0xfd node id 0x3 ts 0x4c4cd843
[2] ttl 0xfe node id 0x1 ts 0x4c562e52
0x4c5470ee (hex) = 1280602350 (decimal)
0x4c4cd843 (hex) = 1280104515 (decimal)
0x4c562e52 (hex) = 1280716370 (decimal)
1)
Each value is only 10 digits.
I think it must be 16 digits when it is configured at "trace-tsp 2
(microseconds)".
I tried millisecond and nanoseconds configuration also, but results were same.
2)
Time series seemed to be incorrect.
Actually, node1 was a first router which got and forwarded packets in my
system. But node1's timestamp was not the oldest one.
I'd greatly appreciate any comment or suggestions you might have.
Regards,
Masaharu Inoue
From: Shwetha Bhandari (shwethab) [mailto:[email protected]]
Sent: Thursday, July 05, 2018 1:23 PM
To: HADI SHAIKHZAKER <[email protected]>; [email protected]
Cc: 井上 勝晴 <[email protected]>
Subject: Re: [vpp-dev] about iOAM configuration
Hi Hadi,
Good to know!
Classification is needed for encap and decap not for transit processing.
Transit processes the options if present. Transit nodes only need node-id and
application data if trace option includes it.
Thanks,
Shwetha
From: HADI SHAIKHZAKER <mailto:[email protected]>
Date: Thursday, July 5, 2018 at 7:57 AM
To: Shwetha bhandari <mailto:[email protected]>, "mailto:[email protected]";
<mailto:[email protected]>
Cc: 井上 勝晴 <mailto:[email protected]>
Subject: RE: [vpp-dev] about iOAM configuration
Just updating.
Configuration in the LXC setup works fine.
Now all the three nodes (encap, transit and decap) works fine.
[0] ttl 0x3e node id 0x3 ts 0x1b0364ae
[1] ttl 0x3f node id 0x2 ts 0x1b0c2f8d
[2] ttl 0x40 node id 0x1 ts 0x1b04e395
Thank you so much again Shewtha.
Regards,
Hadi
From: HADI SHAIKHZAKER
Sent: Thursday, July 05, 2018 10:01 AM
To: 'Shwetha Bhandari (shwethab)' <mailto:[email protected]>;
mailto:[email protected]
Cc: 井上 勝晴 <mailto:[email protected]>
Subject: RE: [vpp-dev] about iOAM configuration
Thanks Shewtha！
I am going to check the lxc setup.
https://github.com/CiscoDevNet/iOAM/tree/master/scripts/vpp_sandbox/example/simple-ip6
By the way in 17.04 there is no classification configuration for transit VPP.
So how that transit VPP understand which packet to rewrite and which not to.
I have tried 17.04 configuration in 18.04 VPP, but seems like as there is no
classification part,
“show errors ” counter in transit vpp doesn’t count up and also “show trace”
doesn’t shows the IP6_HOP_BY_HOP part.
Regards,
Hadi
From: Shwetha Bhandari (shwethab) [mailto:[email protected]]
Sent: Thursday, July 05, 2018 9:48 AM
To: HADI SHAIKHZAKER <mailto:[email protected]>; mailto:[email protected]
Cc: 井上 勝晴 <mailto:[email protected]>
Subject: Re: [vpp-dev] about iOAM configuration
Hi Hadi,
> set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
> app-data 0x1234
To setup the node id and app-data that is needed on transit and decap you need
a trace profile configs:
Example: set ioam-trace profile trace-type 0x9 trace-elts 3 trace-tsp 2 node-id
0x2
I see that 17.04 had the working configs – this is not correct in 18.04 and
latest docs. I will fix the documentation in the latest.
Till then follow https://docs.fd.io/vpp/17.04/ioam_ipv6_doc.html.
Can you please try this:
https://github.com/CiscoDevNet/iOAM/tree/master/scripts/vpp_sandbox/example/simple-ip6
The scripts bring up lxc setup with 3 VPPs for encap, transit, decap along with
the necessary configs.
Thanks,
Shwetha
From: <mailto:[email protected]> on behalf of HADI SHAIKHZAKER
<mailto:[email protected]>
Date: Tuesday, July 3, 2018 at 1:21 PM
To: "mailto:[email protected]"; <mailto:[email protected]>
Cc: 井上 勝晴 <mailto:[email protected]>
Subject: [vpp-dev] about iOAM configuration
Hi vpp-dev team,
I am trying to check the iOAM feature of VPP.
Do you have any working config sample for this?
I have checked the following url's and the configuration mentioned, was
sometimes rejected by the CLI or had no effect.
[URL1] https://docs.fd.io/vpp/18.04/ioam_plugin_doc.html
[URL2] https://docs.fd.io/vpp/17.04/ioam_ipv6_doc.html
I have 3 VPPs
2102:1100::100-->[Encap VPP]---->[Transit VPP]---->[Decap VPP]-->2102:3100::100
^this is the src host
^this one is the dst host
I have the following configuration for Encap Vpp
[Encap Vpp] *Want to add iOAM info to all the traffic towards 2102:3100::100
classify table miss-next ip6-node ip6-lookup mask l3 ip6 dst
classify session acl-hit-next ip6-node ip6-add-hop-by-hop table-index 0 match
l3 ip6 dst 2102:3100::100
set int input acl intfc GigabitEthernet1b/0/0 ip6-table 0
set ioam-trace profile trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
app-data 0x1234
set ioam rewrite trace
Seems like it does encap the info I wanted
======================================
Trace results
[Encap Vpp]
IP6_HOP_BY_HOP: next index 12 len 72 traced 72 Trace Type 0x1f , 3 elts left
[0] ttl 0x0 node id 0x0 ingress 0x0 egress 0x0 ts 0x0
app 0x0
[1] ttl 0x0 node id 0x0 ingress 0x0 egress 0x0 ts 0x0
app 0x0
[2] ttl 0x0 node id 0x0 ingress 0x0 egress 0x0 ts 0x0
app 0x0
[3] ttl 0x40 node id 0x1 ingress 0x3 egress 0x1 ts 0x5efba500 <---- I
think this one is working fine
app 0x1234
The problem I am facing is, configuration for VPP 18.04 as mentioned in the URL
"set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1 app-data
0x1234"
Is being rejected by the cli, so I have changed it as mentioned above.
vpp# set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1 node-id 0x1
app-data 0x1234
unknown input `-type 0x1f trace-elts 4 trace-...'
There are some other problems also, like “node” is also rejected by cli, so I
used ip6-node and this one works
vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst
classify table: Mask required
vpp# classify table miss-next ip6-node ip6-lookup mask l3 ip6 dst
vpp#
And url also showing that this config is required for transit and decap VPP
also.
So do any one have any working configuration for iOAM?
Regards,
Hadi
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#9819): https://lists.fd.io/g/vpp-dev/message/9819
Mute This Topic: https://lists.fd.io/mt/23024218/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
