Please refer to https://wiki.fd.io/view/VPP/BugReports for bug reporting, also https://wiki.fd.io/view/VPP/Configuration_Tool
If you expect folks to volunteer to help you: write up your system configuration, vpp version and configuration, and so forth to a reasonable standard. From: [email protected] <[email protected]> On Behalf Of Mehran Memarnejad Sent: Friday, August 17, 2018 5:51 AM To: [email protected] Subject: [vpp-dev] VPP crashes on multi core Hi, In default configuration of vpp on single core, everything seems ok but when I want to get the most out of my hardware resources and modify vpp startup config, it crashes at some stages. Here is some carshes: 1- I set interface's IP and then when I plugged cables in ports, It suddenly carshes and system needs to be rebooted. 2- once I set up a vpls scenario and I was passing traffics without any problem but when I plugged out the cable connecting PE to P router while the traffic was comming, vpp crashed. In some cases, I use the same configurations but sometimes it crashes and sometimes it doesn't. How should I setup VPP to make it use all hardware resources?? I mean how should I set CPU cores, RAM and etc?? Thanks
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#10203): https://lists.fd.io/g/vpp-dev/message/10203 Mute This Topic: https://lists.fd.io/mt/24610978/21656 Group Owner: [email protected] Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
