Hi Aleksander,

To you want VPP to act like a host or a router?

/neale


From: <vpp-dev@lists.fd.io> on behalf of Aleksander Djuric 
<aleksander.dju...@gmail.com>
Date: Monday, 27 August 2018 at 10:39
To: "vpp-dev@lists.fd.io" <vpp-dev@lists.fd.io>
Subject: [vpp-dev] IGMP enable issue

Hello,

I am trying to configure VPP for IGMP, but with this configuration it seems 
doesn't work:

vpp# igmp listen enable int GigabitEthernet0/3/0
vpp# sh igmp config
vpp# trace add dpdk-input 10
vpp# sh trace
16:38:35:357591: dpdk-input
  GigabitEthernet0/3/0 rx queue 0
  buffer 0x3666: current data 14, length 46, free-list 0, clone-count 0, 
totlen-nifb 0, trace 0x0
                 ext-hdr-valid
                 l4-cksum-computed l4-cksum-correct l2-hdr-offset 0
  PKT MBUF: port 1, nb_segs 1, pkt_len 60
    buf_len 2176, data_len 60, ol_flags 0x0, data_off 128, phys_addr 0x928d9a00
    packet_type 0x0 l2_len 0 l3_len 0 outer_l2_len 0 outer_l3_len 0
    rss 0x0 fdir.hi 0x0 fdir.lo 0x0
  IP4: 00:50:06:00:03:00 -> 01:00:5e:00:00:16
  IGMP: 172.16.1.1 -> 224.0.0.22
    version 4, header length 24
    tos 0xc0, ttl 1, length 40, checksum 0x57e2
    fragment id 0x0000, flags DONT_FRAGMENT
16:38:35:357630: ip4-input
  IGMP: 172.16.1.1 -> 224.0.0.22
    version 4, header length 24
    tos 0xc0, ttl 1, length 40, checksum 0x57e2
    fragment id 0x0000, flags DONT_FRAGMENT
16:38:35:357648: ip4-options
    option:[0x94,0x4,0x0,0x0]
16:38:35:357649: ip4-local
    IGMP: 172.16.1.1 -> 224.0.0.22
      version 4, header length 24
      tos 0xc0, ttl 1, length 40, checksum 0x57e2
      fragment id 0x0000, flags DONT_FRAGMENT
16:38:35:357657: igmp-input
  sw_if_index 2 next-index 0
  membership_report_v3: code 0, checksum 0xeaec
16:38:35:357660: error-drop
  igmp-input: IGMP not enabled on this interface

Source host: Linux a 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) 
x86_64 GNU/Linux, IP 172.16.1.1
Target: VPP v18.10-rc0~248-g4553c95a on VM, compiled with GCC 6.3.0 20170516, 
IP 172.16.1.2
Multicast group address: 224.0.0.22

As you can see, the command "sh igmp config" shows nothing, and trace is 
reported error: IGMP not enabled on this interface.

Could you help me with this?  Thanks a lot.

Regards,
Aleksander


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#10291): https://lists.fd.io/g/vpp-dev/message/10291
Mute This Topic: https://lists.fd.io/mt/24971765/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to