On Thu, 2018-11-08 at 11:59 +0000, Yao, Chengqiang wrote: > Hi Macro, > > > > I’m running on master branch and latest version. > > > > “make test TEST-test_sctp.py” also works for me. I want to benchmark the > performance of sctp, but fifo-size is only 4 in test_sctp.py, > so the throughput is only ~2Gbps. If I increase the fifo-size in > test_sctp.py, then the test fails. Please see: src/vnet/session-apps/echo_client.c src/vnet/session-apps/echo_server.c
In there you would see that fifo-size is shifted left by 10 (that means 4 becomes 4096). Maybe you want to try with 8 or 16? Hopefully, Florin can shed some light about the usage of 4096 for the fifo- size... which would eventually mean a fifo of 4M entries? > That’s why I want to use CLI commands to test SCTP. I’m not intended to run > multiple clients, the reason I set nclients=2 is because > test_sctp.py does the same thing, I just want to keep the same. I am not sure why you see nclients=2 in test_sctp.py... there's no mention of it on latest MASTER... > > You mean you use the same commands in my last mail, and there is no issue? If > yes, then I need to check my setup. > > > > Best Regards, > Chengqiang Yao > > > > > > From: Marco Varlese [mailto:mvarl...@suse.de] > > > Sent: Thursday, November 8, 2018 6:52 PM > > To: Yao, Chengqiang <chengqiang....@intel.com> > > Cc: vpp-dev@lists.fd.io > > Subject: Re: [vpp-dev] #vpp sctp echo test crash > > > > > Dear Yao, > > > > > > First of all, are you on MASTER branch or some other release? > > > > > > Second, can you run "make test TEST=test_sctp.py" and see if that works for > you? It all looks good on my side and on Jenkins. > > > > > > If you are interested in running multiple clients, you can do that by editing > test_sctp.py and add "nclients X" (where X can be 2 or more). > > > > > > Again, I have just tested it right now and I cannot see that issue. > > > > > > > > > > Cheers, > > > Marco > > > > > > On Thu, 2018-11-08 at 09:20 +0000, Yao, Chengqiang wrote: > > > Hi Macro, > > > > I follow test_sctp.py to use following commands in server and client, but > > client can not connect server with an error printed > > “echo_client_node_fn:238: > > stuck clients” as you can see below. > > Do I miss any command ? > > > > > > Server: > > vpp# set int ip address FortyGigabitEthernet18/0/1 192.168.60.73/24 > > vpp# set int state FortyGigabitEthernet18/0/1 up > > vpp# set ip arp FortyGigabitEthernet18/0/1 192.168.60.74 3c:fd:fe:c2:12:68 > > vpp# session enable > > vpp# app ns add id 0 secret 0 sw_if_index 2 > > vpp# test echo server appns 0 fifo-size 4 uri sctp://192.168.60.73/1234 > > > > > > Client: > > vpp# set int ip address FortyGigabitEthernet18/0/0 192.168.60.74/24 > > vpp# set int state FortyGigabitEthernet18/0/0 up > > vpp# set ip arp FortyGigabitEthernet18/0/0 192.168.60.73 3c:fd:fe:c2:17:09 > > vpp# session enable > > vpp# app ns add id 1 secret 0 sw_if_index 1 > > vpp# test echo client nclients 2 mbytes 10 appns 1 fifo-size 4 test-bytes > > syn-timeout 3 uri sctp://192.168.60.73/1234 > > > > > > > > 2 three-way handshakes in 0.00 seconds 4648.53/s > > Test started at 37.835987 > > 0: echo_client_node_fn:238: stuck clients > > Timeout with 2 sessions still active... > > test failed > > test echo clients: failed: timeout with 2 sessions > > > > > > Best Regards, > > Chengqiang Yao > > > > > > > > > > > > > > From: Marco Varlese [mailto:mvarl...@suse.de] > > > > > > Sent: Thursday, November 8, 2018 4:07 PM > > > > To: Yao, Chengqiang <chengqiang....@intel.com> > > > > Cc: vpp-dev@lists.fd.io > > > > Subject: Re: [vpp-dev] #vpp sctp echo test crash > > > > > > > > > > Hi Yao, > > > > > > > > > > > > As per test_sctp.py the command is: > > > > > > > > > > > > test echo server appns 0 fifo-size 4 [URI] > > > > > > > > > > > > Where URI is made up as: sctp://IP/PORT > > > > > > > > > > > > Please, take a look at "test/test_sctp.py" to see also the client side of > > it. > > > > > > > > > > > > > > > > > > HTH, > > > > > > Marco > > > > > > > > > > > > On Wed, 2018-11-07 at 15:01 +0000, Yao, Chengqiang wrote: > > > > > Hi Macro, > > > > > > I use following CLI command to setup SCTP server, but VPP crashed. While > > > this command works for TCP/UDP. > > > > > > Can you tell me the correct cli commands to run echo test for SCTP? > > > > > > > > > vpp# set int ip address FortyGigabitEthernet18/0/1 192.168.60.73/24 > > > vpp# set int state FortyGigabitEthernet18/0/1 up > > > vpp# set ip arp FortyGigabitEthernet18/0/1 192.168.60.74 3c:fd:fe:c2:12:68 > > > vpp# test echo server fifo-size 4096 uri sctp://192.168.60.73/1234 no-echo > > > > > > > > > After debugging, I found it’s caused by invalid sw_if_index in > > > sctp_connection_bind function of sctp.c. > > > > > > > > > > > > > > > Best Regards, > > > Chengqiang Yao > > > > > > > > > > > > > > > > > > From: > > > vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] > > > On Behalf Of Yao, Chengqiang > > > > > > Sent: Thursday, October 25, 2018 9:15 PM > > > > > > To: Marco Varlese <mvarl...@suse.de>; > > > vpp-dev@lists.fd.io > > > > > > Subject: Re: [vpp-dev] #vpp > > > > > > > > > > > > Hi Macro, > > > > > > Thanks for your information, I will have a try. > > > > > > > > > Best Regards, > > > Chengqiang Yao > > > > > > > > > > > > > > > > > > From: Marco Varlese [mailto:mvarl...@suse.de] > > > > > > > > > Sent: Thursday, October 25, 2018 9:09 PM > > > > > > To: Yao, Chengqiang <chengqiang....@intel.com>; > > > vpp-dev@lists.fd.io > > > > > > Subject: Re: [vpp-dev] #vpp > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > On Thu, 2018-10-25 at 04:59 +0000, Yao, Chengqiang wrote: > > > > > > > Hi Macro, > > > > > > > > Is there any sample code to show how to use SCTP (such as association, > > > > packet transmission/reception, etc.)? And is there any performance > > > > report for SCTP? > > > > > > You can have a look at the test for SCTP: > > > > > > > > > 1) test/test_sctp.py > > > > > > > > > 2) src/vnet/session-apps/echo_client.c & echo_server.c > > > > > > > > > > > > > > > > > > The echo_client and echo_server are used by TCP / UDP and SCTP to exercise > > > the networking stack implemented. > > > > > > > > > > > > > > > > > > With regards to the state-machine (I assumed that's what you're asking by > > > "association", "packet transmssion/reception", etc.), the whole of it is > > > gone through when running the tests. > > > > > > > > > If you are interested in seeing/learning how that's implemented I am > > > afraid you need to look into the code tho. > > > > > > > > > > > > > > > > > > With regards to performance: no, there're no reports. However, something > > > can be retrieved by running the test_sctp.py since at the end it prints > > > out how much data has been transferred and how long that took. > > > > > > > > > > > > > > > > > > > > > > > > Best Regards, > > > > Chengqiang Yao > > > > > > Cheers, > > > > > > > > > Marco > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: > > > > vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] > > > > On Behalf Of Marco Varlese > > > > > > > > Sent: Wednesday, October 10, 2018 5:47 PM > > > > > > > > To: srivastava.rac...@gmail.com; > > > > vpp-dev@lists.fd.io > > > > > > > > Subject: Re: [vpp-dev] #vpp > > > > > > > > > > > > > > > > > > > > Hi Srivastava, > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 2018-10-10 at 01:23 -0700, > > > > srivastava.rac...@gmail.com wrote: > > > > > > > > > Hi > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Does the VPP support SCTP. If yes what is the configuration for SCTP. > > > > > Does it support the same features as the linux kernel SCTP ? > > > > > > > > > > > > > VPP has an implementation for SCTP. You can look into /src/vnet/sctp > > > > folder to see what we currently support in terms of RFC. > > > > > > > > > > > > Any feedback (and contribution) is very much welcome! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks > > > > > > > > > > > > > > > Rachit Srivastava > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Marco > > > > > > > > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- > > > > > > > > > > > > > > > Links: You receive all messages sent to this group. > > > > > > > > > > > > > > > View/Reply Online (#10787): > > > > > > > > > > > > > > > https://lists.fd.io/g/vpp-dev/message/10787 > > > > > > > > > > > > > > > Mute This Topic: > > > > > > > > > > > > > > > https://lists.fd.io/mt/27155313/675056 > > > > > > > > > > > > > > > Mute #vpp: > > > > > > > > > > > > > > > https://lists.fd.io/mk?hashtag=vpp&subid=1480704 > > > > > > > > > > > > > > > Group Owner: > > > > > > > > > > > > > > > vpp-dev+ow...@lists.fd.io > > > > > > > > > > > > > > > Unsubscribe: > > > > > > > > > > > > > > > https://lists.fd.io/g/vpp-dev/unsub > > > > > > > > > > > > > > > [ > > > > > > > > > > > > > > > mvarl...@suse.de > > > > > > > > > > > > > > > ] > > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- > > > > > > > > > > > > > > -=-=-=-=-=-=-=-=-=-=-=- > > Links: You receive all messages sent to this group. > > > > View/Reply Online (#11153): > > > > https://lists.fd.io/g/vpp-dev/message/11153 > > > > > > Mute This Topic: > > > > https://lists.fd.io/mt/28023358/675056 > > > > > > Mute #vpp: > > > > https://lists.fd.io/mk?hashtag=vpp&subid=1480704 > > > > > > Group Owner: > > > > vpp-dev+ow...@lists.fd.io > > > > > > Unsubscribe: > > > > https://lists.fd.io/g/vpp-dev/unsub > > > > [ > > > > mvarl...@suse.de > > > > ] > > -=-=-=-=-=-=-=-=-=-=-=- > > > > > -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group. > View/Reply Online (#11157): https://lists.fd.io/g/vpp-dev/message/11157 > Mute This Topic: https://lists.fd.io/mt/28023358/675056 > Mute #vpp: https://lists.fd.io/mk?hashtag=vpp&subid=1480704 > Group Owner: vpp-dev+ow...@lists.fd.io > Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [mvarl...@suse.de]-=-=-=-=- > =-=-=-=-=-=-=-
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11161): https://lists.fd.io/g/vpp-dev/message/11161 Mute This Topic: https://lists.fd.io/mt/28023358/21656 Mute #vpp: https://lists.fd.io/mk?hashtag=vpp&subid=1480452 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
