Hi,
I see the issue, will come up with a patch shortly.
Thanks,
Klement
Quoting Jan Gelety via Lists.Fd.Io (2019-01-30 10:22:18)
> Hello vpp-dev team,
>
>
>
> Our csit performance tests for Ipsec using aes-gcm ciphering started to
> fail because created ipsec interface cannot get to up state – tested with
> vpp master (build 19.04-rc0~67-g72de626~b6198) as well as with stable/1901
> (build 19.01-rc2~3-g9124874~b2).
>
>
>
> We are using HW crypto card, dpdk plugin is loaded and dpdk backend is
> active ipsec backend for ESP. We are receiving following responses for set
> interface state up command:
>
>
>
> - in case of AES-GCM-128: set interface state: unsupported
> aes-gcm-128 crypto-alg
>
> - in case of AES-GCM-192: set interface state: unsupported none
> integ-alg
>
>
>
> Could you, please, let us know if there is something wrong in our
> configuration (see VAT commands and startup.conf below; it worked before)
> or there is a bug in vpp?
>
>
>
> Thanks,
>
> Jan
>
>
>
> VAT commands used to configure vpp:
>
> sw_interface_set_flags sw_if_index 2 admin-up link-up
>
> sw_interface_set_flags sw_if_index 1 admin-up link-up
>
> sw_interface_dump
>
> hw_interface_set_mtu sw_if_index 2 mtu 9200
>
> hw_interface_set_mtu sw_if_index 1 mtu 9200
>
> sw_interface_dump
>
> sw_interface_dump
>
> sw_interface_dump
>
> sw_interface_add_del_address sw_if_index 2 192.168.10.1/24
>
> sw_interface_add_del_address sw_if_index 1 172.168.1.1/24
>
> ip_neighbor_add_del sw_if_index 2 dst 192.168.10.2 mac 68:05:ca:35:79:1c
>
> ip_neighbor_add_del sw_if_index 1 dst 172.168.1.2 mac 68:05:ca:35:76:b1
>
> ip_add_del_route 10.0.0.0/8 via 192.168.10.2 sw_if_index 2
> resolve-attempts 10 count 1
>
> ipsec_tunnel_if_add_del local_spi 10000 remote_spi 20000 crypto_alg
> aes-gcm-192 local_crypto_key
> 685857656d48393835654169447a516864314e51447450666352706a remote_crypto_key
> 685857656d48393835654169447a516864314e51447450666352706a local_ip
> 172.168.1.1 remote_ip 172.168.1.2
>
> exec ip route add 20.0.0.0/32 via 172.168.1.2 ipsec0
>
> exec set interface unnumbered ipsec0 use FortyGigabitEthernet88/0/0
>
> exec set interface state ipsec0 up
>
>
>
> Our startup.conf:
>
> ip
>
> {
>
> heap-size 4G
>
> }
>
> statseg
>
> {
>
> size 4G
>
> }
>
> unix
>
> {
>
> cli-listen /run/vpp/cli.sock
>
> log /tmp/vpe.log
>
> full-coredump
>
> nodaemon
>
> }
>
> ip6
>
> {
>
> heap-size 4G
>
> hash-buckets 2000000
>
> }
>
> heapsize 4G
>
> plugins
>
> {
>
> plugin default
>
> {
>
> disable
>
> }
>
> plugin dpdk_plugin.so
>
> {
>
> enable
>
> }
>
> }
>
> cpu
>
> {
>
> corelist-workers 20
>
> main-core 19
>
> }
>
> dpdk
>
> {
>
> dev 0000:88:00.1
>
> dev 0000:88:00.0
>
> no-multi-seg
>
> uio-driver igb_uio
>
> log-level debug
>
> dev default
>
> {
>
> num-rx-desc 2048
>
> num-rx-queues 1
>
> num-tx-desc 2048
>
> }
>
> dev 0000:86:01.0
>
> socket-mem 1024,1024
>
> no-tx-checksum-offload
>
> }
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#12058): https://lists.fd.io/g/vpp-dev/message/12058
Mute This Topic: https://lists.fd.io/mt/29592457/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
