> Hi Sander, > > Yes, unfortunately we are given a 100mbp port from our provider for a > remote branch location, thus the need for full duplex to match the provider. > > Thank you, > Jesse > > On Fri, Mar 8, 2019 at 17:05 Sander Steffann <[email protected]> wrote: > >> Hi, >> >> > Is it possible in VPP v18.01.2 to set the physical interface duplex to >> full? We must match our service provider setting of full. >> > >> > The CLI docs are not clear in this. >> >> Are you still using 100Mbps ports? Half-duplex and full-duplex are only >> relevant for 100Mbps ports. Higher speeds mandate auto config and basically >> never use (or even support) half-duplex anymore. >> >> Cheers, >> Sander >> >>
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group.
View/Reply Online (#12475): https://lists.fd.io/g/vpp-dev/message/12475 Mute This Topic: https://lists.fd.io/mt/30317940/21656 Group Owner: [email protected] Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
