Not sure what is going on, however I noticed you are trying to use VF and not PF. Could try to use 09:00.0 and 09:00.1? Any reason to stick with DPDK and not use RDMA driver?
Best ben > -----Original Message----- > From: [email protected] <[email protected]> On Behalf Of > [email protected] > Sent: jeudi 20 juin 2019 13:01 > To: [email protected] > Subject: Re: [vpp-dev] Mellanox interfaces not getting detected with > vpp19.04 > > Hi, > > Please find my responses below > > Did you whitelist the PCI devices in VPP configuration (https://fdio- > vpp.readthedocs.io/en/latest/gettingstarted/users/configuring/startup.html > #dpdk)? > If you are using CentOS/RHEL, can you try disabling SELinux ('setenforce > 0' under Linux) and see if it is better? > Otherwise, does the Mellanox interfaces work with DPDK testpmd? > > >>>>>Yes, i whitelist the PCI devices in startup.conf. > >>>>>I am using RHEL and tried with disabling SELinux too but to no > effect. > >>>>>I also tried with testpmd and testpmd was able to detect the port. > > As requested, i am attaching all the outputs. > > Regards > Amit
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#13340): https://lists.fd.io/g/vpp-dev/message/13340 Mute This Topic: https://lists.fd.io/mt/32141457/21656 Group Owner: [email protected] Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
