Hello Everyone,
I am facing an issue while bringing up vpp with *less than 2 rx and 2 tx
queue*. I am using vpp19.08. I have configured pci's under the dpdk section
like below -
1)
dpdk {
# dpdk-config
dev default {
num-rx-desc 1024
num-rx-queues 1
num-tx-desc 1024
num-tx-queues 1
# vlan-strip-offload off
}
dev 0000:1b:00.0 {
}
dev 0000:13:00.0 {
}
}
When I bring pci state to up , it is showing error in "show
hardware-interfaces"
DBGvpp# set interface state GigabitEthernet13/0/0 up
DBGvpp# show hardware-interfaces
Name Idx Link Hardware
GigabitEthernet13/0/0 1 down GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:50:56:9b:f5:c5
VMware VMXNET3
carrier down
flags: admin-up pmd maybe-multiseg rx-ip4-cksum
Devargs:
* rx: queues 1 (max 16), desc 1024 (min 128 max 4096 align 1) tx:
queues 1 (max 8), desc 1024 (min 512 max 4096 align 1)* pci: device
15ad:07b0 subsystem 15ad:07b0 address 0000:13:00.00 numa 0
max rx packet len: 16384
promiscuous: unicast off all-multicast off
vlan offload: strip off filter off qinq off
rx offload avail: vlan-strip ipv4-cksum udp-cksum tcp-cksum tcp-lro
vlan-filter jumbo-frame scatter
rx offload active: ipv4-cksum jumbo-frame scatter
tx offload avail: vlan-insert ipv4-cksum udp-cksum tcp-cksum tcp-tso
multi-segs
tx offload active: multi-segs
rss avail: ipv4-tcp ipv4-udp ipv4 ipv6-tcp ipv6-udp ipv6
rss active: none
tx burst function: vmxnet3_xmit_pkts
rx burst function: vmxnet3_recv_pkts
* Errors:*
* rte_eth_dev_start[port:0, errno:1]: Operation not permitted*
2) When bring up system without "*dev default* " section , still facing the
same issue , this time default [Rx-queue is 1 and tx-queue is 2 (main
thread + 1 worker)]
DBGvpp# show hardware-interfaces
Name Idx Link Hardware
GigabitEthernet13/0/0 1 down GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:50:56:9b:f5:c5
VMware VMXNET3
carrier down
flags: admin-up pmd maybe-multiseg rx-ip4-cksum
Devargs:
* rx: queues 1 (max 16), desc 1024 (min 128 max 4096 align 1) tx:
queues 2 (max 8), desc 1024 (min 512 max 4096 align 1)* pci: device
15ad:07b0 subsystem 15ad:07b0 address 0000:13:00.00 numa 0
max rx packet len: 16384
promiscuous: unicast off all-multicast off
vlan offload: strip off filter off qinq off
rx offload avail: vlan-strip ipv4-cksum udp-cksum tcp-cksum tcp-lro
vlan-filter jumbo-frame scatter
rx offload active: ipv4-cksum jumbo-frame scatter
tx offload avail: vlan-insert ipv4-cksum udp-cksum tcp-cksum tcp-tso
multi-segs
tx offload active: multi-segs
rss avail: ipv4-tcp ipv4-udp ipv4 ipv6-tcp ipv6-udp ipv6
rss active: none
tx burst function: vmxnet3_xmit_pkts
rx burst function: vmxnet3_recv_pkts
* Errors: rte_eth_dev_start[port:0, errno:1]: Operation not permitted*
Thanks,
Chetan Bhasin
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#15145): https://lists.fd.io/g/vpp-dev/message/15145
Mute This Topic: https://lists.fd.io/mt/69669298/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
