Thanks Damjan for the reply! Following are my observations on Intel X710/XL710 pci- 1) I took latest code base from stable/vpp19.08 : Seeing error as " *ethernet-input l3 mac mismatch*" * With Buffers 537600*
*vpp# show buffers |Pool Name Index NUMA Size Data Size Total Avail Cached Useddefault-numa-0 0 0 2496 2048 537600 510464 1319 25817default-numa-1 1 1 2496 2048 537600 528896 390 8314* *vpp# show hardware-interfaces* Name Idx Link Hardware BondEthernet0 3 up BondEthernet0 Link speed: unknown Ethernet address 3c:fd:fe:b5:5e:40 FortyGigabitEthernet12/0/0 1 up FortyGigabitEthernet12/0/0 Link speed: 40 Gbps Ethernet address 3c:fd:fe:b5:5e:40 Intel X710/XL710 Family carrier up full duplex mtu 9206 flags: admin-up pmd rx-ip4-cksum rx: queues 16 (max 320), desc 1024 (min 64 max 4096 align 32) tx: queues 16 (max 320), desc 4096 (min 64 max 4096 align 32) pci: device 8086:1583 subsystem 8086:0001 address 0000:12:00.00 numa 0 max rx packet len: 9728 promiscuous: unicast off all-multicast on vlan offload: strip off filter off qinq off rx offload avail: vlan-strip ipv4-cksum udp-cksum tcp-cksum qinq-strip outer-ipv4-cksum vlan-filter vlan-extend jumbo-frame scatter keep-crc rx offload active: ipv4-cksum tx offload avail: vlan-insert ipv4-cksum udp-cksum tcp-cksum sctp-cksum tcp-tso outer-ipv4-cksum qinq-insert vxlan-tnl-tso gre-tnl-tso ipip-tnl-tso geneve-tnl-tso multi-segs mbuf-fast-free tx offload active: none rss avail: ipv4-frag ipv4-tcp ipv4-udp ipv4-sctp ipv4-other ipv6-frag ipv6-tcp ipv6-udp ipv6-sctp ipv6-other l2-payload rss active: ipv4-frag ipv4-tcp ipv4-udp ipv4-other ipv6-frag ipv6-tcp ipv6-udp ipv6-other tx burst function: i40e_xmit_pkts_vec_avx2 rx burst function: i40e_recv_pkts_vec_avx2 tx errors 17 rx frames ok 4585 rx bytes ok 391078 extended stats: rx good packets 4585 rx good bytes 391078 tx errors 17 rx multicast packets 4345 rx broadcast packets 243 rx unknown protocol packets 4588 rx size 65 to 127 packets 4529 rx size 128 to 255 packets 32 rx size 256 to 511 packets 26 rx size 1024 to 1522 packets 1 tx size 65 to 127 packets 33 FortyGigabitEthernet12/0/1 2 up FortyGigabitEthernet12/0/1 Link speed: 40 Gbps Ethernet address 3c:fd:fe:b5:5e:40 Intel X710/XL710 Family carrier up full duplex mtu 9206 flags: admin-up pmd rx-ip4-cksum rx: queues 16 (max 320), desc 1024 (min 64 max 4096 align 32) tx: queues 16 (max 320), desc 4096 (min 64 max 4096 align 32) pci: device 8086:1583 subsystem 8086:0000 address 0000:12:00.01 numa 0 max rx packet len: 9728 promiscuous: unicast off all-multicast on vlan offload: strip off filter off qinq off rx offload avail: vlan-strip ipv4-cksum udp-cksum tcp-cksum qinq-strip outer-ipv4-cksum vlan-filter vlan-extend jumbo-frame scatter keep-crc rx offload active: ipv4-cksum tx offload avail: vlan-insert ipv4-cksum udp-cksum tcp-cksum sctp-cksum tcp-tso outer-ipv4-cksum qinq-insert vxlan-tnl-tso gre-tnl-tso ipip-tnl-tso geneve-tnl-tso multi-segs mbuf-fast-free tx offload active: none rss avail: ipv4-frag ipv4-tcp ipv4-udp ipv4-sctp ipv4-other ipv6-frag ipv6-tcp ipv6-udp ipv6-sctp ipv6-other l2-payload rss active: ipv4-frag ipv4-tcp ipv4-udp ipv4-other ipv6-frag ipv6-tcp ipv6-udp ipv6-other tx burst function: i40e_xmit_pkts_vec_avx2 rx burst function: i40e_recv_pkts_vec_avx2 rx frames ok 4585 rx bytes ok 391078 extended stats: rx good packets 4585 rx good bytes 391078 rx multicast packets 4344 rx broadcast packets 243 rx unknown protocol packets 4587 | rx size 65 to 127 packets 4528 rx size 128 to 255 packets 32 rx size 256 to 511 packets 26 rx size 1024 to 1522 packets 1 tx size 65 to 127 packets 33 *As per packet trace -* Packet 4 00:00:54:955863: dpdk-input FortyGigabitEthernet12/0/0 rx queue 0 buffer 0x13fc728: current data 0, length 68, buffer-pool 0, ref-count 1, totlen-nifb 0, trace handle 0x1000003 ext-hdr-valid | l4-cksum-computed l4-cksum-correct PKT MBUF: port 0, nb_segs 1, pkt_len 68 buf_len 2176, data_len 68, ol_flags 0x180, data_off 128, phys_addr 0xde91ca80 packet_type 0x1 l2_len 0 l3_len 0 outer_l2_len 0 outer_l3_len 0 rss 0x0 fdir.hi 0x0 fdir.lo 0x0 Packet Offload Flags PKT_RX_IP_CKSUM_GOOD (0x0080) IP cksum of RX pkt. is valid PKT_RX_L4_CKSUM_GOOD (0x0100) L4 cksum of RX pkt. is valid Packet Types RTE_PTYPE_L2_ETHER (0x0001) Ethernet packet 0x0000: 00:00:00:00:00:00 -> 00:00:00:00:00:00 00:00:54:955864: bond-input src 00:00:00:00:00:00, dst 00:00:00:00:00:00, FortyGigabitEthernet12/0/0 -> BondEthernet0 00:00:54:955864: ethernet-input 0x0000: 00:00:00:00:00:00 -> 00:00:00:00:00:00 00:00:54:955865: error-drop rx:BondEthernet0 00:00:54:955865: drop ethernet-input: l3 mac mismatch 2) I have took latest code-base from stable/vpp2001 branch: Everything looks fine with * Buffers 537600* 3) I took previous commit of "vlib: don't use vector for keeping buffer indices in the pool " ie "df0191ead2cf39611714b6603cdc5bdddc445b57" : Everything looks fine with *Buffers 537600.* So this cleary shows the above commit will not fix our problem. Thanks, Chetan On Wed, Feb 12, 2020 at 9:07 PM Damjan Marion <dmar...@me.com> wrote: > > Shouldn’t be too hard to checkout commit prior to that one and test if > problem is still there… > > — > Damjan > > > On 12 Feb 2020, at 14:50, chetan bhasin <chetan.bhasin...@gmail.com> > wrote: > > Hi, > > Looking into the changes in vpp 20.1 , the below change looks good > important related to buffer indices . > > *vlib: don't use vector for keeping buffer indices in the pool * > > Type: refactor > > > Change-Id: I72221b97d7e0bf5c93e20bbda4473ca67bfcdeb4 > > Signed-off-by: Damjan Marion <damar...@cisco.com> > > > > https://github.com/FDio/vpp/commit/b6e8b1a7c8bf9f9fbd05cdc3c90111d9e7a6897b#diff-2260a8080303fbcc30ef32f782b4d6df > <https://url10.mailanyone.net/v1/?m=1j1reR-0000fQ-5y&i=57e1b682&c=nJZ-BXH5lshb2jA0XjZcJfV589cXx2IknVPOvIfeZzkHN0-1aiqoxkznIe6cMM1Q36XZK9v-i6Rhciwdfyj3g0j5HWsUCsAptLO9zuiQAUmOYUrK1p2_6frehR05g36O6OEk7t1RALQ_8k5obWKPc1_zGGk7sAXIm8hlot1JYDk8Ws8lQq0gFnUcbL4gBsWrDIf5U2-aedLh9p5BR5EWP_jwcQ0qrkyaCJBngVK3ZdTeur5m1tCcUh9RH_Aup9qg9LMelskGtWqpvOOOxBX2sGn3JlsJHk6r56933BJuIKhr7uoUtg4QXyBmbJJjoob40spvLJ4ZLn6oI5GCDZoAWg> > > > Can anybody suggest ? > > Shouldn’t be too hard to checkout commit prior to that one and test if > problem is still there… > > — > Damjan > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#15413): https://lists.fd.io/g/vpp-dev/message/15413 Mute This Topic: https://lists.fd.io/mt/70968414/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-