Hi, When i want to send packet from DPDK based generator to VPP. packages are not visible when "show int"
DBGvpp# show int Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count TenGigabitEthernet1/0/0 1 down 9000/0/0/0 TenGigabitEthernet1/0/1 2 up 9000/0/0/0 local0 0 down 0/0/0/0 but when "show hardware-interfaces", "rx_total_packets" is not fill TenGigabitEthernet1/0/1 2 down TenGigabitEthernet1/0/1 Link speed: unknown Ethernet address ac:1f:6b:f8:1f:11 Intel 82599 carrier down flags: admin-up pmd maybe-multiseg tx-offload intel-phdr-cksum rx-ip4-cksum rx: queues 1 (max 128), desc 2048 (min 32 max 4096 align 8) tx: queues 1 (max 64), desc 2048 (min 32 max 4096 align 8) pci: device 8086:1528 subsystem 15d9:0734 address 0000:01:00.01 numa 0 max rx packet len: 15872 promiscuous: unicast off all-multicast on vlan offload: strip off filter off qinq off rx offload avail: vlan-strip ipv4-cksum udp-cksum tcp-cksum tcp-lro macsec-strip vlan-filter vlan-extend jumbo-frame scatter security keep-crc rss-hash rx offload active: ipv4-cksum jumbo-frame scatter tx offload avail: vlan-insert ipv4-cksum udp-cksum tcp-cksum sctp-cksum tcp-tso macsec-insert multi-segs security tx offload active: udp-cksum tcp-cksum multi-segs rss avail: ipv4-tcp ipv4-udp ipv4 ipv6-tcp-ex ipv6-udp-ex ipv6-tcp ipv6-udp ipv6-ex ipv6 rss active: none tx burst function: ixgbe_xmit_pkts rx burst function: ixgbe_recv_scattered_pkts_vec extended stats: mac_local_errors 84 mac_remote_errors 3 rx_total_packets 637 rx_total_bytes 581074 What can I do in this situation? Are my packets not being delivered properly to my nodes?
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#18256): https://lists.fd.io/g/vpp-dev/message/18256 Mute This Topic: https://lists.fd.io/mt/78753720/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
