Hi Venu, You can do that with ABF, see https://wiki.fd.io/view/VPP/ABF
Best ben > -----Original Message----- > From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Venumadhav > Josyula > Sent: lundi 19 avril 2021 13:17 > To: vpp-dev <vpp-dev@lists.fd.io> > Subject: [vpp-dev] route based on the source ip > > Hi, > > We have a requirement such that > i) we want to have a vrf table for each vlan interface. Each vrf will have > it own default route > ii)for packets from the host interface , we want to have a route based on > the source ip such we can redirect to use vrf table as next hop table. > iii) We are using strongswan for ipsec, and we don't want to enable the > install_route option of strongswan, so that we can packet remote host to > be sent to default route in the vrf table. Please our problem is not > specific to ipsec processing by routes > > > The problem statement is how do we route the host interface packets to > appropriate vrf table corresponding to the vlan interface. We donot know > the remote ip for which we want install route. > > So is it possible to have a route based on source ip ? > > > Thanks, > Regards, > Venu >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#19246): https://lists.fd.io/g/vpp-dev/message/19246 Mute This Topic: https://lists.fd.io/mt/82206233/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
