Hi, Ben I have used the latest master which includes the patch.
commit 1a06e53341224bb08cff2fb6d218415c50f947d3 Author: Benoît Ganne <[email protected]> Date: Wed May 19 16:41:03 2021 +0200 af_xdp: use desc offset on rx Instead of pre-programming the data offset on rx, use offset passed in the descriptor. This is more robust and future-proof. Type: fix Change-Id: I2bd910d92b8b03d17be5be85a24108be711dc7b9 Signed-off-by: Benoît Ganne <[email protected]> Thx, Xuekun -----Original Message----- From: Benoit Ganne (bganne) <[email protected]> Sent: Tuesday, May 25, 2021 9:18 PM To: Hu, Xuekun <[email protected]>; [email protected] Subject: RE: AF_XDP usage help in VPP21.01 Hi Xuekun, Can you try with the latest master which now contains https://gerrit.fd.io/r/c/vpp/+/32384 if you did not already tried it? I suspect that could be an offset issue and this change should be more robust for those. Best ben > -----Original Message----- > From: Hu, Xuekun <[email protected]> > Sent: mardi 25 mai 2021 14:21 > To: Benoit Ganne (bganne) <[email protected]>; [email protected] > Subject: RE: AF_XDP usage help in VPP21.01 > > Hi, Ben. > > I figured out the problem in my setup that on the ixgbe driver. > 1. ixgbe 5.1.0 (which don't have XDP enabled yet) + VPP master (that > have your below patch) : work 2. ixgbe 5.8.1 (which have XDP enabled) > + VPP master : doesn't work > > Strange. Have any ideas? > Thanks. > > Thx, Xuekun > > -----Original Message----- > From: Benoit Ganne (bganne) <[email protected]> > Sent: Thursday, May 20, 2021 12:50 AM > To: Hu, Xuekun <[email protected]>; [email protected] > Subject: RE: AF_XDP usage help in VPP21.01 > > Hi Xuekun, > > > Thanks for reply. However my kernel is 5.7.19, and I checked that > > only the first patch was included. > > So, any more thoughts? > > Can you try https://gerrit.fd.io/r/c/vpp/+/32384 and see if it fixes > you issue? > > Best > ben > > > > -----Original Message----- > > From: Benoit Ganne (bganne) <[email protected]> > > Sent: Monday, May 17, 2021 4:26 PM > > To: Hu, Xuekun <[email protected]>; [email protected] > > Subject: RE: AF_XDP usage help in VPP21.01 > > > > Hi Xuekun, > > > > I suspect you are using a Linux kernel >= 5.9. There was an ABI > > change between 5.8 and 5.9, the issue is discussed here: > > https://lore.kernel.org/bpf/BYAPR11MB365382C5DB1E5FCC53242609C1549@B > > YA > > PR11 > > MB3653.namprd11.prod.outlook.com/ > > I'd recommend using a Linux kernel between 5.6 and 5.9 for now until > > those issues are resolved. > > > > Best > > ben > > > > > -----Original Message----- > > > From: [email protected] <[email protected]> On Behalf Of > > > Xuekun > > > Sent: jeudi 13 mai 2021 15:17 > > > To: [email protected] > > > Subject: [vpp-dev] AF_XDP usage help in VPP21.01 > > > > > > Hi, All > > > > > > > > > > > > I used VPP21.01 and AF_XDP on a physical nic. > > > > > > I followed the guide in > > > https://docs.fd.io/vpp/21.01/d8/d44/af_xdp_doc.html > > > <https://docs.fd.io/vpp/21.01/d8/d44/af_xdp_doc.html> that > > > > > > 1. ip link set dev <iface> promisc on > > > 2. vppctl create int af_xdp host-if ... // load the > default > > > one, which I think should forward all received packets from kernel > > > to > > VPP > > > 3. vppctl set int mac address <iface> <mac> // set to the NIC > MAC. > > > 4. vppctl set int ip addr ... > > > > > > > > > > > > However "vppctl ping" still failed with "l3 mac mismatch". > > > > > > > > > > > > vpp# show errors > > > > > > Count Node Reason > > > Severity > > > > > > 20 ip4-glean ARP requests > sent > > > error > > > > > > 20 enp9s0f0/0-tx sendto required > > > error > > > > > > 82 ethernet-input l3 mac mismatch > > > error > > > > > > From the remote ping target machine, tcpdump did show receiving > > > the arp request and sending the arp reply with the correct dmac. > > > > > > > > > > > > However in VPP, "trace add af_xdp-input 10", and "show trace" > > > > > > Packet 1 > > > > > > > > > > > > 00:14:16:539735: af_xdp-input > > > > > > af_xdp: enp9s0f0/0 (2) next-node ethernet-input > > > > > > 00:14:16:539744: ethernet-input > > > > > > frame: flags 0x1, hw-if-index 2, sw-if-index 2 > > > > > > 0x0000: 00:00:00:00:00:00 -> 00:00:00:00:00:00 > > > > > > 00:14:16:539748: error-punt > > > > > > rx:enp9s0f0/0 > > > > > > 00:14:16:539750: punt > > > > > > ethernet-input: l3 mac mismatch > > > > > > > > > > > > Does anyone have any ideas? > > > > > > Many thanks. > > > > > > > > > > > > Thx, Xuekun > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#19460): https://lists.fd.io/g/vpp-dev/message/19460 Mute This Topic: https://lists.fd.io/mt/82798670/21656 Group Owner: [email protected] Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
