In addition, do
1. show hardware
The bond, eth1/0, and eth2/0 should have the same mac address.
2. show lacp details
Check these statistics for the interface that is not forming the bond
Good LACP PDUs received: 13
Bad LACP PDUs received: 0
LACP PDUs sent: 14
last LACP PDU received: .58 seconds ago
last LACP PDU sent: .31 seconds ago
On 11/15/22, 7:22 AM, "vpp-dev@lists.fd.io on behalf of Benoit Ganne (bganne)
via lists.fd.io" <vpp-dev@lists.fd.io on behalf of
bganne=cisco....@lists.fd.io> wrote:
> As suggested we tried putting the rdma interfaces in promiscuous mode, but
> still facing the same issue:-
> vpp# set interface promiscuous on eth1/0 vpp# set interface promiscuous on
> eth2/1
> What could be the possible reason for this issue?
Can you share a packet trace?
vpp# cle tr
vpp# tr add rdma-input 10
[wait for LACP packets to be sent]
vpp# sh tr
Also, error counters and logs should be of interest:
vpp# sh hard
vpp# sh err
vpp# sh log
Best,
ben
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#22185): https://lists.fd.io/g/vpp-dev/message/22185
Mute This Topic: https://lists.fd.io/mt/94956154/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
