Hi Jerome,
Thank you for your help. I’ve collected the requested outputs and included them
below.
Please let me know if you need anything else.
Best regards,
Excel
:~# mst status -v
MST modules:
------------
MST PCI module is not loaded
MST PCI configuration module is not loaded
PCI devices:
------------
DEVICE_TYPE MST PCI RDMA
NET NUMA VFIO
ConnectX5(rev:0) NA 01:00.0 rocep1s0f0
net-enp1s0f0np0 -1 vfio-01:00.0
ConnectX5(rev:0) NA 01:00.1 rocep1s0f1
net-enp1s0f1np1 -1 vfio-01:00.1
root@RO-RSD-EDGE-001:~# mget_temp -d 01:00.0 -v
# name T/V temp thresh
1 iopx T 71 130
2 iopl T 68 130
3 yu T 66 130
root@RO-RSD-EDGE-001:~# mget_temp -d 01:00.1 -v
# name T/V temp thresh
1 iopx T 71 130
2 iopl T 68 130
3 yu T 66 130
root@RO-RSD-EDGE-001:~# mlxlink -d 01:00.0 -p 1 -m
Operational Info
----------------
State : Active
Physical state : LinkUp
Speed : 40GbE
Width : 4x
FEC : No FEC
Loopback Mode : No Loopback
Auto Negotiation : ON
Supported Info
--------------
Enabled Link Speed : 0xf8f1f0d3 (100G,50G,40G,25G,10G,1G)
Supported Cable Speed : 0x00014000 (40G,10G)
Troubleshooting Info
--------------------
Status Opcode : 0
Group Opcode : N/A
Recommendation : No issue was observed
Tool Information
----------------
Firmware Version : 16.29.1016
MFT Version : 4.34.1-25
Module Info
-----------
Temperature [C] : 40 [-10..80]
Voltage [mV] : 3282.3 [2900..3700]
Bias Current [mA] : 36.782,28.542,36.180,36.180 [10..75]
Rx Power Current [dBm] : -2,0,0,-2 [-16..4]
Tx Power Current [dBm] : 0,0,0,-2 [-8..4]
Identifier : QSFP+
Compliance : 40GBASE-LR4,Unspecified
Cable Technology : 1310 nm DFB laser
Cable Type : Optical Module (separated)
OUI : Other
Vendor Name : ModuleTek
Vendor Part Number : UTQ40L1L
Vendor Serial Number : MR1T2209060002
Rev : 1A
Wavelength [nm] : 1310
Transfer Distance [m] : 0
Attenuation (5g,7g,12g)[dB] : N/A
FW Version : N/A
Digital Diagnostic Monitoring : Yes
Power Class : 4 (3.5 W max)
MAX Power : 0.0 W max
CDR RX : OFF,OFF,OFF,OFF
CDR TX : N/A
LOS Alarm : N/A
SNR Media Lanes [dB] : N/A
SNR Host Lanes [dB] : N/A
IB Cable Width : N/A
Memory Map Revision : 0
Linear Direct Drive : 0
Cable Breakout : Channels implemented [1,2,3,4]/Far end is
unspecified
SMF Length : N/A
Cable Rx AMP : 0
Cable Rx Emphasis : 15
Cable Rx Post Emphasis : 0
Cable Tx Equalization : 15
Wavelength Tolerance : 0.0nm
Module State : N/A
DataPath state [per lane] : N/A,N/A,N/A,N/A
Rx Output Valid [per lane] : 0,0,0,0
Nominal bit rate : 0.000Gb/s
Rx Power Type : OMA
Manufacturing Date : N/A
Active Set Host Compliance Code : N/A
Active Set Media Compliance Code : N/A
Error Code Response : N/A
Module FW Fault : N/A
DataPath FW Fault : N/A
Tx Fault [per lane] : 0,0,0,0
Tx LOS [per lane] : 0,0,0,0
Tx CDR LOL [per lane] : 0,0,0,0
Rx LOS [per lane] : 0,0,0,0
Rx CDR LOL [per lane] : 0,0,0,0
Tx Adaptive EQ Fault [per lane] : 0,0,0,0
root@RO-RSD-EDGE-001:~# mlxlink -d 01:00.1 -p 1 -m
Operational Info
----------------
State : Active
Physical state : LinkUp
Speed : 40GbE
Width : 4x
FEC : No FEC
Loopback Mode : No Loopback
Auto Negotiation : ON
Supported Info
--------------
Enabled Link Speed : 0xf8f1f0d3 (100G,50G,40G,25G,10G,1G)
Supported Cable Speed : 0x00014000 (40G,10G)
Troubleshooting Info
--------------------
Status Opcode : 0
Group Opcode : N/A
Recommendation : No issue was observed
Tool Information
----------------
Firmware Version : 16.29.1016
MFT Version : 4.34.1-25
Module Info
-----------
Temperature [C] : 41 [-10..80]
Voltage [mV] : 3272.6 [2970..3630]
Bias Current [mA] : 43.244,41.264,40.544,41.384 [10..70]
Rx Power Current [dBm] : 0,0,0,0 [-14..6]
Tx Power Current [dBm] : 0,0,0,0 [-12..6]
Identifier : QSFP+
Compliance : 40GBASE-LR4,Unspecified
Cable Technology : 1310 nm DFB laser
Cable Type : Optical Module (separated)
OUI : Other
Vendor Name : HUAWEI
Vendor Part Number : OM3559CX100
Vendor Serial Number : 034GXRLDP1102898
Rev : 01
Wavelength [nm] : 1310
Transfer Distance [m] : 0
Attenuation (5g,7g,12g)[dB] : N/A
FW Version : N/A
Digital Diagnostic Monitoring : Yes
Power Class : 4 (3.5 W max)
MAX Power : 0.0 W max
CDR RX : N/A
CDR TX : N/A
LOS Alarm : N/A
SNR Media Lanes [dB] : N/A
SNR Host Lanes [dB] : N/A
IB Cable Width : N/A
Memory Map Revision : 0
Linear Direct Drive : 0
Cable Breakout : Channels implemented [1,2,3,4]/Far end is
unspecified
SMF Length : N/A
Cable Rx AMP : 2
Cable Rx Emphasis : 4
Cable Rx Post Emphasis : 0
Cable Tx Equalization : 0
Wavelength Tolerance : 0.0nm
Module State : N/A
DataPath state [per lane] : N/A,N/A,N/A,N/A
Rx Output Valid [per lane] : 0,0,0,0
Nominal bit rate : 0.000Gb/s
Rx Power Type : OMA
Manufacturing Date : N/A
Active Set Host Compliance Code : N/A
Active Set Media Compliance Code : N/A
Error Code Response : N/A
Module FW Fault : N/A
DataPath FW Fault : N/A
Tx Fault [per lane] : 0,0,0,0
Tx LOS [per lane] : 0,0,0,0
Tx CDR LOL [per lane] : 0,0,0,0
Rx LOS [per lane] : 0,0,0,0
Rx CDR LOL [per lane] : 0,0,0,0
Tx Adaptive EQ Fault [per lane] : 0,0,0,0
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#27256): https://lists.fd.io/g/vpp-dev/message/27256
Mute This Topic: https://lists.fd.io/mt/121485004/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/14379924/21656/631435203/xyzzy
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
