On Thu, Jan 15, 2004 at 03:02:16PM -0500, Jason Kent wrote: > For those of you who read my previous inquiry I've > decided to go with 0.26 instead of 0.27 or 0.29. > > So far I've downloaded vserver-0.26.src.tar.gz to my > Debian(woody) box and I have a partition (/vservers) > where I will be running my vservers. I have > accomplished this feit before but lost my HDD and all > the instructions I had on the setup/install. > Previously I used the install-pre.sh, -post.sh and > -fix.sh files but cannot remember how I got it work. I > have tried to install this setup but end up screwing > my initial console and sending my box into a never > ending rebooting sequence where I am unable to recover > it and have to start over from the debian > installation. I am trying to show my bosses (who are > dead against using Open Source solutions) the benifits > of using Linux and other Open Source products to > accomplish what they think only Microsoft can do. All > I ask is that someone send me some instructions on > howto setup using the install-***.sh files or even a > link that will point me to a helpful site.
I strongly advise a visit on the irc channel #vserver on irc.oftc.net ... it should be easy to help you there, as many community members already run debian + vserver very successfully HTH, Herbert > .. Thanks .. Jae > > ______________________________________________________________________ > Post your free ad now! http://personals.yahoo.ca > _______________________________________________ > Vserver mailing list > [EMAIL PROTECTED] > http://list.linux-vserver.org/mailman/listinfo/vserver _______________________________________________ Vserver mailing list [EMAIL PROTECTED] http://list.linux-vserver.org/mailman/listinfo/vserver
