Herbert Poetzl schrieb:
On Fri, Jul 30, 2004 at 10:06:34AM +0200, Michael Ganzhorn wrote:
Hi there,
I have got a problem within a running vserver instance. I can connect to the vserver via ping, ssh, telnet, ... but from inside the vserver instance i only can ping other systems, no chance to ssh or telnet to other systems.
Do you have an idea what could be the reason???
about 1000, so to narrow it down the following infos might be really appreciated:
- the kernel version - the linux-vserver patch version - the utility and it's version - your vserver configuration - the network setup on the host - what actually fails on a ssh out
- Kernel: 2.4.26 - linux-vserver patch 2.4.26 vsl 28 - util-vserver-0.30
-vserver-config: if [ "" = "" ] ; then PROFILE=prod fi
case $PROFILE in
prod)
IPROOT=10.1.1.40
IPROOTDEV=eth0
S_HOSTNAME=raynix
;;
backup)
IPROOT=1.2.3.4
S_HOSTNAME=
;;
esac
S_DOMAINNAME=
S_NICE=
S_FLAGS="lock nproc"
ULIMIT="-HS -u 1000"
S_CAPS="CAP_NET_RAW CAP_SYS_RAWIO CAP_SYS_RESOURCE CAP_SYS_ADMIN CAP_SYS_MODULE CAP_NET_BROADCAST CAP_NET_ADMIN CAP_MKNOD"
- Network on the host:
eth0 Protokoll:Ethernet Hardware Adresse 00:A0:CC:61:56:84
inet Adresse:10.1.1.1 Bcast:10.1.1.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10069614 errors:1 dropped:0 overruns:0 frame:0
TX packets:21880805 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl�nge:1000
RX bytes:1187497970 (1.1 GiB) TX bytes:3734077679 (3.4 GiB)
Interrupt:11 Basisadresse:0xd800eth0:rayn Protokoll:Ethernet Hardware Adresse 00:A0:CC:61:56:84
inet Adresse:10.1.1.40 Bcast:10.1.1.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:11 Basisadresse:0xd800eth1 Protokoll:Ethernet Hardware Adresse 00:0E:A6:5B:6C:48
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4592318 errors:0 dropped:0 overruns:0 frame:0
TX packets:4580858 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:11614 Sendewarteschlangenl�nge:1000
RX bytes:1193318894 (1.1 GiB) TX bytes:2125739076 (1.9 GiB)
Interrupt:11 Basisadresse:0xa800lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2551382 errors:0 dropped:0 overruns:0 frame:0
TX packets:2551382 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl�nge:0
RX bytes:1543417633 (1.4 GiB) TX bytes:1543417633 (1.4 GiB)ppp0 Protokoll:Punkt-zu-Punkt Verbindung
inet Adresse:217.230.22.108 P-z-P:217.5.98.33 Maske:255.255.255.255
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:8036 errors:0 dropped:0 overruns:0 frame:0
TX packets:6765 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl�nge:3
RX bytes:2100918 (2.0 MiB) TX bytes:608999 (594.7 KiB)
-ssh works on host in the local net, but not outside, nat seams not to work but i don`t know why, its setup the same way than for the other hosts (the firewall is running on the same machine).
On other problem i have, i need to run a xserver on the host but its not working
I checked also my firewall settings, but found nothing special.
- what the fw settings are - what tcpdump on a 'failing' ssh/telnet looks like
TIA, Herbert
regards micha <mailto:[EMAIL PROTECTED]>
-- ------------------------------------------------------------------------ On the requirements it said: Windows 98 or better - so I installed Linux
Michael Ganzhorn
mailto:[EMAIL PROTECTED] webhome:http://www.ganzhorn.de
_______________________________________________
Vserver mailing list
[EMAIL PROTECTED]
http://list.linux-vserver.org/mailman/listinfo/vserver
-- ------------------------------------------------------------------------ On the requirements it said: Windows 98 or better - so I installed Linux
Michael Ganzhorn
mailto:[EMAIL PROTECTED] webhome:http://www.ganzhorn.de
_______________________________________________ Vserver mailing list [EMAIL PROTECTED] http://list.linux-vserver.org/mailman/listinfo/vserver
