Michal,
You might try recompiling the tools without dietlib. That's what I had
to do to make things work in x86_64.
Until you do that, or use the patch that Herbert supplied, you will
have problems.
Paul
Michal Ludvig wrote:
Herbert Poetzl wrote:
- the tools (util-vserver 0.30.206, + dietlibc 0.28+patches)
emit some stuff, do some things, whatever .. which 'disturbes
the X keyboard ... (unlikely, but possible)
* make sure that the tools are the latest and dietlibc is
(patched on x86_64)
Where can I get the patch? I'm using plain dietlibc 0.28 on amd64
* check by starting the vserver from a different host
(logged on via ssh, and maybe telnet)
Over ssh it works with no problems. However e.g. locally from screen it
still dies.
- the init inside the vserver does something which manages
to confuse the X keyboard (would be an isolation issue)
* try to replace the init with an minit or a different init
Replaced with debian woody statically linked init and still the same.
* replace the init by an strace wrapper to dump the syscalls
- there is an unwanted 'connection' between the X (on the host)
and the vserver which really should not be there
* check for device nodes in /dev and various other places
* verify that no 'magic' keys are copied from the host
What do you mean with magic keys?
* look for pipes (fifos) which run between host and guest
It is a fresh SL92 vserver, almost no extra config done. There should be
no such fifos.
However... I stripped down /etc/rc.d/rc to just running sshd and exit.
Still the same. Subsequent vserver halting from the master looks like this:
root:~ # vserver popelka stop
vkill: vc_ctx_kill(): No such process
Vserver '/usr/local/etc/vservers/popelka' still running unexpectedly;
please investigate it manually...
root:~ # vserver popelka stop
vserver 'popelka' is not running
Once I exit the dead X session (running e.g. on tty7) I still can't use
the keyboard. I must ssh from a different host and with "chvt 1" switch
the console. Only after that I could use the keyboard again. When going
back to tty7 I can see some binary garbage after "INIT: no more
processes left in this runlevel".
Not too much of success...
Michal Ludvig
|
_______________________________________________
Vserver mailing list
[email protected]
http://list.linux-vserver.org/mailman/listinfo/vserver
