I have bad experience with LVM and raid it is near impossible to fix LVM
if you have problems mounting them after a kernel change. LVM is not as
supported in the resucue mode in most distro's CDs

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck
Sent: Wednesday, February 15, 2006 1:35 AM
To: [email protected]
Subject: Re: [Vserver] Vservers and RAID (5 & hard)


On Tuesday 14 February 2006 05:41 pm, John Alberts wrote:

I agree 100% that is what I am using on my vserver host as well and I
have 
enough free space unassigned to last several years at this point. LVM2
should 
actually become a permanent built-in part of all file systems :) As I
re-do 
my home workstations, I am changing them over to LVM2 as well. I will
not 
install linux now without it unless it is an extremely specific
installation 
that will not allow it (which I have yet to encounter) (romable code is
the 
only thing I can think of ).

Chuck

> I recently purchased a Dell PowerEdge 2850 that I'm using for 
> vservers.  I'm using Gentoo for the host and guests.  Seems to work 
> really great so far. I purchased 4 10k rpm 73G u320 drives and use 
> them in a single raid5 partition.  I then used LVM2 to partiion up the

> space.
> 
> Here's the output of fdisk -l :
> 
> Disk /dev/sda: 219.8 GB, 219823472640 bytes
> 255 heads, 63 sectors/track, 26725 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> 
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sda1               1          12       96358+  de  Dell Utility
> /dev/sda2   *          13          21       72292+  83  Linux
> /dev/sda3              22         508     3911827+  82  Linux swap /
Solaris
> /dev/sda4             509       26725   210588052+   5  Extended
> /dev/sda5             509         752     1959898+  83  Linux
> /dev/sda6             753       26725   208628091   8e  Linux LVM
> 
> As you can see, I have a partition for /boot, /, and swap.  The rest 
> is for
LVM.
> 
> I then divided up the LVM for the remainder of the system. Here's what

> lvdisplay shows:
> 
>   --- Logical volume ---
>   LV Name                /dev/vg/usr
>   VG Name                vg
>   LV UUID                **I
>   LV Write Access        read/write
>   LV Status              available
>   # open                 1
>   LV Size                10.01 GB
>   Current LE             2563
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     0
>   Block device           254:0
> 
>   --- Logical volume ---
>   LV Name                /dev/vg/home
>   VG Name                vg
>   LV UUID                **
>   LV Write Access        read/write
>   LV Status              available
>   # open                 1
>   LV Size                5.00 GB
>   Current LE             1280
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     0
>   Block device           254:1
> 
>   --- Logical volume ---
>   LV Name                /dev/vg/opt
>   VG Name                vg
>   LV UUID                **
>   LV Write Access        read/write
>   LV Status              available
>   # open                 1
>   LV Size                5.00 GB
>   Current LE             1280
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     0
>   Block device           254:2
> 
>   --- Logical volume ---
>   LV Name                /dev/vg/var
>   VG Name                vg
>   LV UUID                **
>   LV Write Access        read/write
>   LV Status              available
>   # open                 1
>   LV Size                10.00 GB
>   Current LE             2560
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     0
>   Block device           254:3
> 
>   --- Logical volume ---
>   LV Name                /dev/vg/tmp
>   VG Name                vg
>   LV UUID                **
>   LV Write Access        read/write
>   LV Status              available
>   # open                 1
>   LV Size                2.00 GB
>   Current LE             512
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     0
>   Block device           254:4
> 
>   --- Logical volume ---
>   LV Name                /dev/vg/vservers
>   VG Name                vg
>   LV UUID                **
>   LV Write Access        read/write
>   LV Status              available
>   # open                 1
>   LV Size                30.00 GB
>   Current LE             7680
>   Segments               1
>   Allocation             inherit
>   Read ahead sectors     0
>   Block device           254:5
> 
> 
> I still have lots of unused LVM space.  I just expand my /vserver 
> volume and any others as needed.
> 
> Performance is great.
> 
> Hope this helps your decision.
> 
> On 2/14/06, Lars Hallberg <[EMAIL PROTECTED]> wrote:
> > Sam Vilain wrote:
> >
> > > I hate that!  Such a deep directory... besides, the unix 
> > > conventions of var, /usr, etc, were made before this use case was 
> > > considered (/com, anyone?).  I think it deserves its own TLD (top 
> > > level directory).
> >
> > /var/lib/vservers ... Have no problems with that... but i symlink it

> > as 'v' from /root :-) ... and /etc/vservers as 'e' :-)
> >
> > Thats Ubuntu... same as Debian I asume.
> >
> > /LaH
> >
> > _______________________________________________
> > Vserver mailing list
> > [email protected] 
> > http://list.linux-vserver.org/mailman/listinfo/vserver
> >
> _______________________________________________
> Vserver mailing list
> [email protected] 
> http://list.linux-vserver.org/mailman/listinfo/vserver
> 

-- 

Chuck

"...and the hordes of M$*ft users descended upon me in their anger, and
asked 'Why do you not get the viruses or the BlueScreensOfDeath or
insecure system troubles and slowness or pay through the nose 
for an OS as *we* do?!!', and I answered...'I use Linux'. "
The Book of John, chapter 1, page 1, and end of book


_______________________________________________
Vserver mailing list
[email protected]
http://list.linux-vserver.org/mailman/listinfo/vserver

_______________________________________________
Vserver mailing list
[email protected]
http://list.linux-vserver.org/mailman/listinfo/vserver

Reply via email to