Hi, I try to configure a server with 2 physical interfaces (eth0 and eth1). The host uses eth0 with IP 172.20.128.110. I created a vserver named vs03. It uses eth1 with IP 194.57.88.253.
On my host (debian sarge), I configure my network with : # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.20.128.110 netmask 255.255.255.0 network 172.20.128.0 broadcast 172.20.128.255 gateway 172.20.128.254 up ip route add 172.20.128.0/24 dev eth0 src 172.20.128.110 table 64 up ip route add default via 172.20.128.254 table 64 up ip rule add from 172.20.128.0/24 table 64 post-down ip rule delete from 172.20.128.0/24 table 64 auto eth1 iface eth1 inet static address 194.57.88.253 netmask 255.255.255.0 network 194.57.88.0 broadcast 194.57.88.255 up ip route add 194.57.88.0/24 dev eth1 src 194.57.88.253 table 68 up ip route add default via 194.57.88.254 table 68 up ip rule add from 194.57.88.0/24 table 68 post-down ip rule delete from 194.57.88.0/24 table 68 When I disconnect eth1, I can ping 172.20.128.110. Why ? Where I make a mistake ? Thank. Jean-Michel Caricand [EMAIL PROTECTED] Accédez au courrier électronique de La Poste : www.laposte.net ; 3615 LAPOSTENET (0,34 /mn) ; tél : 08 92 68 13 50 (0,34/mn) _______________________________________________ Vserver mailing list [email protected] http://list.linux-vserver.org/mailman/listinfo/vserver
