On Sat, Dec 02, 2006 at 02:12:16PM +0100, [EMAIL PROTECTED] wrote: > Hello, > > I've tried util-vserver-0.30.212 with kernel-2.6.19: compil ok, starting > vservers ok . Just a little bug : > > trying vserver vweb1 enter : ok but the prompt indicates always vweb3 as i'm > in vweb1's context : > > srvweb:/usr/local/util-vserver-0.30.212-rc2# vserver vweb1 enter > WARNING: can not find configuration, assuming legacy method > ipv4root is now 192.168.0.230 > New security context is 49152 > vweb3:/# ip addr > 2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000 > link/ether 00:16:17:1a:69:87 brd ff:ff:ff:ff:ff:ff > inet 192.168.0.230/24 brd 192.168.0.255 scope global secondary > eth0:vweb1 > vweb3:/# exit > logout > srvweb:/usr/local/util-vserver-0.30.212-rc2# vserver vweb3 enter > WARNING: can not find configuration, assuming legacy method
legacy will not work either .. although we might be able to work around that in the future HTH, Herbert > ipv4root is now 192.168.0.232 > New security context is 49154 > vweb3:/# ip addr > 2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000 > link/ether 00:16:17:1a:69:87 brd ff:ff:ff:ff:ff:ff > inet 192.168.0.232/24 brd 192.168.0.255 scope global secondary > eth0:vweb3 > vweb3:/# > > Patrick > > > ----- Original Message ----- > From: "Herbert Poetzl" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: <[email protected]> > Sent: Friday, December 01, 2006 8:20 PM > Subject: Re: [Vserver] Just for info about 2.6.19 > > > > On Fri, Dec 01, 2006 at 06:48:33PM +0100, [EMAIL PROTECTED] wrote: > > > Hello, > > > > > > I'm using util-vserver 0.30.211 > > > > which does not support 2.6.19 kernels, because > > mainline changed in regard of virtualization > > in back then 'unexpected' ways ... > > > > please update to 0.30.212+ > > > > best, > > Herbert > > > > > srvweb:/etc/bind# vserver-info > > > Versions: > > > Kernel: 2.6.18.3-vs2.1.1.2 > > > VS-API: 0x00020102 > > > util-vserver: 0.30.211; Oct 18 2006, 14:38:29 > > > > > > Features: > > > CC: gcc, gcc (GCC) 3.3.5 (Debian 1:3.3.5-13) > > > CXX: g++, g++ (GCC) 3.3.5 (Debian 1:3.3.5-13) > > > CPPFLAGS: '' > > > CFLAGS: '-g -O2 -std=c99 -Wall -pedantic -W' > > > CXXFLAGS: > > > '-g -O2 -ansi -Wall -pedantic -W -fmessage-length=0' > > > build/host: i686-pc-linux-gnu/i686-pc-linux-gnu > > > Use dietlibc: yes > > > Build C++ programs: yes > > > Build C99 programs: yes > > > Available APIs: compat,v11,fscompat,v13,net,oldproc,olduts > > > ext2fs Source: e2fsprogs > > > syscall(2) invocation: alternative > > > vserver(2) syscall#: 273/glibc > > > > > > Paths: > > > prefix: /usr/local > > > sysconf-Directory: ${prefix}/etc > > > cfg-Directory: ${prefix}/etc/vservers > > > initrd-Directory: $(sysconfdir)/init.d > > > pkgstate-Directory: ${prefix}/var/run/vservers > > > vserver-Rootdir: /opt/vservers > > > > > > > > > Assumed 'SYSINFO' as no other option given; try '--help' for more > > > information. > > > > > > =============================================================== > > > srvweb:/etc/bind# vserver-stat > > > CTX PROC VSZ RSS userTIME sysTIME UPTIME NAME > > > 0 84 985.7M 219.2M 4m17s11 1m51s38 6h50m05 root server > > > 49152 18 421M 119.7M 0m07s54 0m01s11 6h49m08 > > > 49153 16 838.4M 85.8M 0m03s14 0m03s62 6h48m54 > > > 49154 11 66M 23.4M 0m00s33 0m00s40 6h48m41 > > > > > > Patrick > > > > > > ----- Original Message ----- > > > From: "Daniel Hokka Zakrisson" <[EMAIL PROTECTED]> > > > To: <[email protected]> > > > Sent: Friday, December 01, 2006 6:02 PM > > > Subject: Re: [Vserver] Just for info about 2.6.19 > > > > > > > > > > [EMAIL PROTECTED] wrote: > > > > > Hello > > > > > > > > > > I try new release today (patch-2.6.19-vs2.1.x-t1.diff) but it > doesn't > > > work > > > > > properly : boot ok, starting vserver ok but it doesn't switch > context i > > > > > think. > > > > > > > > > > I try to explain : > > > > > my master is : srvweb > > > > > So i try : > > > > > srvweb:/#vserver vweb1 start > > > > > srvweb:/#vserver vweb2 start > > > > > srvweb:/#vserver vweb3 start > > > > > > > > > > All seems to work fine but suddenly the prompt is changing : > vweb3:/# > > > > > whereas i didn't enter into vserver !!! The context-ID are OK in > > > > > /usr/local/var/run/vservers/vwebX.ctx > > > > > but i can't never get out from vweb3 !!! i've seen on the tty1 a > > > message : > > > > > get_ctx_id() and the prompt was changing alone whereas i wasn't > loggued > > > on > > > > > this tty. > > > > > > > > > > Then i enter into vserver vweb3 and i try to leave it with CTRL-D : > it > > > stays > > > > > in vweb3 in the home directory of user with which i connect to the > > > master ! > > > > > I can never come back to the master.... > > > > > > > > > > I think it's a very little bug for you :-) > > > > > > > > > > Thanks again for your great job. > > > > > > > > > > Patrick > > > > > > > > You _are_ using at least util-vserver 0.30.212-rc1, right? That's when > > > > the initial 2.6.19 support was added, and (from what I hear) it works > > > > for most things, but some are broken (e.g. chcontext not creating a > new > > > > UTS namespace). > > > > > > > > -- > > > > Daniel Hokka Zakrisson > > > > GPG id: 06723412 > > > > GPG fingerprint: A455 4DF3 990A 431F FECA 7947 6136 DDA2 0672 3412 > > > > _______________________________________________ > > > > Vserver mailing list > > > > [email protected] > > > > http://list.linux-vserver.org/mailman/listinfo/vserver > > > > > > > > > > _______________________________________________ > > > Vserver mailing list > > > [email protected] > > > http://list.linux-vserver.org/mailman/listinfo/vserver > > > > _______________________________________________ > Vserver mailing list > [email protected] > http://list.linux-vserver.org/mailman/listinfo/vserver _______________________________________________ Vserver mailing list [email protected] http://list.linux-vserver.org/mailman/listinfo/vserver
