i have seen many of you have similar setups so if there is a known problem we should all know about it...
has anyone heard of a problem with the sda channel in the SATA on board silicone image 3114 controller in general or on a tyan 2882D series motherboard using opteron processors? we are running a software raid1 and sda keeps going south even with a new hdd to the point it is not detectable at all.. a power down, unplug plug back in and restart usually cures it and the array re-syncs then gets an error and sda is no longer visible to anything,.. it is a tyan GX28 system. i am running all my vserver partitions on lvm2 under this if that has any bearing.. outside of a faulty motherboard i am at a loss as to what could cause this. -- Chuck _______________________________________________ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver