Hello Mario, Thursday, January 23, 2003, 1:12:19 AM, you wrote:
ML> Hello, ML> I have set up a box with vserver using the xfmonkey redhat 2.4.18-19.7.2 ML> kernel RPMs as per the FAQ. ML> The setup is out of the box; single eth0 network setup with a single IP ML> address of the host machine, and one vserver with its IP address configured ML> on the vserver.conf file, netmasks there kept empty (but that doesnt ML> matter-I tested). ML> The problem I have is that once I start the vserver, the host computer ML> will change its primary IP, eg, it will talk to other machines in the LAN ML> using the IP of the new vserver instance. What is worse tho, once ML> I stop the vserver (and its associated interface goes down), I cannot talk ML> to any machine on the LAN anymore; telnet will complain about invalid ML> parameters and not even attempt; incomming traffic to the old IP does ML> however work. ML> Now I didnt do any chbind on the host machine, and overall am puzzled why ML> this happens. ML> Looking into the xfmonkey source RPM, it seems like the vserver patch there ML> is ctx-12 which seems rather old. ML> a) Any hints on how to get the abovementioned problem sorted, using the ML> "standard" xfmonkey RPM ? ML> b) Any backports of ctx-16 to RedHat 2.4.18-19 ? I tried patching manually, ML> fixing a couple rejects was easy, but the O(1) scheduler stuff I cannot seem ML> to be able to fix... ML> Any other hints ? this RPM based on my version vserver patch. you can download lastes version her from my home page www.ttn.ru/~shadow/ and apply manually. if you have bugs send to me bug report and i fix this. -- Best regards, Lyashkov mailto:[EMAIL PROTECTED]
