Hi, i try out the per Context Quota and do the following steps.
* vanilla kernel 2.4.22 with alle patches from Herbert * vserver-0.23 after reboot i setup the vroot with "vrsetup /dev/vroot/0 /dev/hda3" (must i do that after every reboot??) hda3 is mounted on /mnt/vserversa and alle vServer are linked to /vservers. A second hd is mounted on /dec/vserversb. now i use this command "chcontext --ctx 100 cqhadd -v /dev/hda3" to activate the quota for vServer "v01" and start the vServer "v01" "quotacheck -avgu" and "quotaon -avgu" all works fine. now i setup a second vserver "v02" with the same userids and do the same things for v02. Quota works fine ;) I make some test an got many crashes (i make a Photo from that ;)) when i do the "chcontext --ctx 100 cqhadd -v /dev/hda3" after i start the vServer. Now i must wroth a script that adds the quota before the vServer starts. But the Problem is the /dev/real/block/device. How can i find out die real block device like /dev/hda3 for a vServer on demand when the vServer starts. cya later /stephan -- "Communication with an engineer is only slightly more difficult than communication with the dead." -Lorren 'Rus' Stiles, Sr.
