Hi bish, Am 21.02.2012 04:07, schrieb bishop: > Christof, > > What happens when you initiate the connection to the server? Your > client config says > type tun; > and > ifconfig ".... netmask .." > > .. which doesn't work: netmask is for ether(tap). And, also, 'type' > is ignored in the client. I'm really confused now - to me, "ether" sounds like the barebone ethernet below IP, while a netmask is an IP property ... > > So, since we have a config, let's look at the logging and behaviour. > I think we may have corrected one error only to find another. If so, > it's one less to fix ;-) > > - bish You are right, I most likely still have a configuration error, although things do work after reboot. Unfortunately, the Vtun man pages are quite terse, so it is difficult for a beginner to assembe a good configuration to start with.
Like I said, I need the tunel to talk to a mobile behind the carrier's NAT, and as I have to pay for every tranferred byte, I'd prefer a solution with minimal traffic. Can anyone point me to some more elaborate documentation or examples for Vtun, or suggest a working configuration with minimal (or even no?) idle traffic? Thanks for helping, Chris ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Vtun-Users mailing list Vtun-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/vtun-users
