a and b are simple, almost any router including vyatta can do this.
for c, are you saying you want any user with any random ip
configuration on their machine to be able to plug in and get online
with that random ip, subnet, and gateway? That's a heck of a request
and I'm not sure how it would be possible for vyatta (or any other
router) to know what the user is using, assign itself the correct ip
address that the user is trying to use as a gateway and create an
outbound NAT. I suppose you might could cobble something together
with tshark by looking at arp requests and some intelligent guessing
maybe... but seriously... how hard is it to click "obtain settings
from DHCP"?
I've used mikrotik pretty extensively, and I don't recall ever seeing
an option like this. I must be misunderstanding your request, perhaps
you could explain a little better? If you know what the settings are
on the computers that come in without dhcp enabled, you could set up
a secondary ip on the eth2 interface and create a matchinf outbound
nat rule, that would be easy. but if its completely random and you
dont know what it is ahead of time....
------------------
Aubrey Wells
Senior Engineer
Shelton | Johns Technology Group
404.478.2790
www.sheltonjohns.com
On Oct 23, 2007, at 8:11 AM, mson77 wrote:
Hello List,
My goal is:
================================================================
1) a box with 3 ethernet cards (interfaces): eth0, eth1, eth2;
2) eth0 attached to internet access provider ISP0;
eth1 attached to internet access provider ISP1;
eth2 attached to local dynamic LAN users;
================================================================
What I need or wish:
a) the router be able to use these 2 WAN links, load balancing and
in case of failure of one link... switch all the requests to the
second available link; and when the failure link comes back on...
do the load balancing again;
b) have dhcp server binded to eth2 as above for users with dhcp
client enabled;
c) now for those who use static IP configurations, I mean: with
static IP, static gateway and DNS servers:
==> and these static configurations does not belong to our eth2 lan
subnet.
TODAY I have to go to this user laptop and change manually its IP
configuration... changing them to dynamic IP setup to receive our
dhcp IP configuration. This is what I do not want anymore.
==> I wish that VYATTA be able to route... to allow this user with
any static IP configuration to access internet... i.e. to be routed
to internet and browse the internet as other regular dhcp users.
Is ir possible with VYATTA?
I saw a solution that provides this "amazing and nice" feature
called MIKROTIK/MAXINA...
Thanks in advance,
mson77
_______________________________________________
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users
_______________________________________________
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users