Oh, yes! Problem is: It works fine as long as the delay on the link is 1-2sec. I get FULL exchange of LSAs. When the delay on the link increases due to more traffic, it breaks.... It looks like the Hello packets gets through, but I have not been able to verify the same for either the LSAs or the ACKs.
Jon On 10/23/07, Justin Fletcher <[EMAIL PROTECTED]> wrote: > > Obvious question, but is this set the same on the routers on both > sides of the link? > > Justin > > On 10/23/07, Jon <[EMAIL PROTECTED]> wrote: > > > > > > Hi all, > > > > I have a problem with ospf loosing connection over high latency links. > The > > link in question will induce a delay from minimum 1 sec to a maximum of > more > > than 20 sec. (Yes, such links do exist:-/ ) > > > > I have tried to set the hello and router-dead intervals to 60 and 240 > > respectivly, but I still loose the connection. > > > > I have also tried to manipulate transmit-delay and retransmit in order > to > > handle the latency (20 and 90secs) but no luck so far. > > > > Can anybody tell me why this happens, or at least what I can do to make > ospf > > a bit more forgiving about delayed packages (If that is the problem...)? > > > > > > Thanks in advance, > > > > Jon > > > > > > _______________________________________________ > > Vyatta-users mailing list > > [email protected] > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > > > >
_______________________________________________ Vyatta-users mailing list [email protected] http://mailman.vyatta.com/mailman/listinfo/vyatta-users
