Ah - you beat me to it, I was just in the middle of opening a bug. :) I'll add my comments to yours as to what I discovered.
------------------ Aubrey Wells Senior Engineer Shelton | Johns Technology Group 404.478.2790 www.sheltonjohns.com On Oct 24, 2007, at 11:18 AM, Robyn Orosz wrote: > Hi Aubrey, > > I am seeing the same issue on my system. I have opened a bug for > this: > > https://bugzilla.vyatta.com/show_bug.cgi?id=2447 > > Thank you for discovering this issue. > > One possible workaround is to assign an unused address directly > beneath one of your ethernet interfaces and include this subnet in > the DHCP server configuration. > > Example: > > ethernet eth1 { > hw-id: 00:0c:29:53:1e:6e > address 10.10.10.10 { <-----------just an arbitrary address > that won't conflict with any internal addresses > prefix-length: 32 > } > vif 10 { > address 172.16.10.1 { > prefix-length: 24 > } > } > } > > dhcp-server { > shared-network-name "DHCP-1" { > subnet 10.10.10.10/32 { <---------just add this in and > the DHCP server should commit fine w/o errors > } > subnet 172.16.10.0/24 { > start 172.16.10.100 { > stop: 172.16.10.200 > } > default-router: 172.16.10.1 > } > } > } > > Let me know if this works for you. If this solution is not > acceptable for some reason, you could also generate the dhcpd.conf > file manually, remove the dhcp server configuration from the CLI, > and then copy the dhcpd.conf file into /opt/vyatta/etc on boot and > start the dhcpd on boot. This would have to be in a script placed > in rc.local. > > Thank you, > > Robyn > > Aubrey Wells wrote: >> Hello, >> I'm trying to get a dhcp server running on a vyatta router and i'm >> having a little trouble. I want to run the server on a vlan >> interface (53) off of int eth1. When I try to commit my config, it >> tells me that the subnet I'm trying to use is not on any >> interfaces, but it is. I think its because the subnet is on a vif. >> Relevant output and config snips below: >> >> ### trying to add the dhcpd subnet ### >> >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> set service dhcp-server >> [edit] >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> set service dhcp-server shared-network-name Service >> [edit] >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> set service dhcp-server shared-network-name Service subnet >> 172.16.254.0/24 >> [edit] >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> commit >> [edit] >> Commit Failed >> DHCP server configuration error. None of the DHCP lease subnets >> attempted in commit are inside any of the ethernet interface >> subnets configured on this system. At least one DHCP lease subnet >> must be inside an ethernet interface subnet. >> DHCP server configuration commit aborted due to error(s). >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> >> >> ### my routing table showing the subnet is on int eth1.54 ### >> >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> run show route >> [edit] >> Routes: 9/9, Paths: 9/9 >> 0.0.0.0/0 [static(1)] > to 4.x.x.5 via >> eth0.50 >> 4.x.x.4/30 [connected(0)] > to 4.x.x.6 via >> eth0.50 >> 8.x.x.0/29 [connected(0)] > to 8.x.x.1 via >> eth1.51 >> 8.x.x.8/29 [connected(0)] > to 8.x.x.9 via >> eth1.52 >> 8.x.x.16/28 [connected(0)] > to 8.x.x.17 via >> eth1.1192 >> 8.x.x.32/27 [connected(0)] > to 8.x.x.33 via >> eth1.53 >> 10.11.80.0/24 [connected(0)] > to 10.11.80.6 >> via eth0.1180 >> 127.0.0.0/8 [connected(0)] > to 127.0.0.1 >> via lo >> 172.16.254.0/24 [connected(0)] > to 172.16.254.1 >> via eth1.54 >> >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> >> ### eth1 config ### >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> show interfaces ethernet eth1 >> hw-id: 00:11:43:30:89:b2 >> vif 51 { >> address 8.x.x.1 { >> prefix-length: 29 >> } >> } >> vif 1192 { >> address 8.x.x.17 { >> prefix-length: 28 >> } >> } >> vif 52 { >> address 8.x.x.9 { >> prefix-length: 29 >> } >> } >> vif 53 { >> address 8.x.x.33 { >> prefix-length: 27 >> } >> } >> vif 54 { >> address 172.16.254.1 { >> prefix-length: 24 >> } >> } >> >> [edit] >> [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]># >> >> >> Any ideas? I'm running the latest beta. >> >> * >> * >> *------------------* >> *Aubrey Wells* >> /Senior Engineer/ >> Shelton | Johns Technology Group >> A Vyatta Ready Partner >> www.sheltonjohns.com >> >> >> >> >> --------------------------------------------------------------------- >> --- >> >> _______________________________________________ >> Vyatta-users mailing list >> Vyatta-users@mailman.vyatta.com >> http://mailman.vyatta.com/mailman/listinfo/vyatta-users >> _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
