Thanks Marat, I will try it asap.
Marat Nepomnyashy wrote: > Hi Sergio, > > There is a limitation in the VC3 release in that only 'ethX' values > can be specified for DHCP relay interfaces. This is due to overly > stringent validation checks. I just opened a new bug on this: > > https://bugzilla.vyatta.com/show_bug.cgi?id=2473 > > > A temporary work-around can be implemented using the attachments just > added to Bug 2473. > > There is the attachment id 238 that should be copied over the runtime > file '/opt/vyatta/share/xorp/templates/rl_dhcp.tp' on your router. > You will also need to apply the patch in attachment id 239 to the > runtime script file '/opt/vyatta/sbin/dhcrelay-starter.pl' to disable > another validation check. You will have to reboot the router for the > validation checks removals to take effect, so make sure you're running > off a disk rather than CDROM, or the changes will be lost. > > Hope this works for now, > > -- Marat > > ----- Original Message ----- From: "Sergio Garcia" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, November 14, 2007 4:34 AM > Subject: [Vyatta-users] DHCP relay in vif interfaces (vc3) > > >> Hi all. >> I hope you can help me with this doubt :) >> I want to relay dhcp requests incoming from tree eth1 vif's to a dhcp >> server but Vyatta VC3 only allows me to select "ethX" interfaces (X goes >> from 0 to 23). >> >> Is it possible to do this? Launching dhcrelay manually is not a good >> solution, but if it is the only way I will accept. >> >> Thanks in advance >> >> _______________________________________________ >> Vyatta-users mailing list >> Vyatta-users@mailman.vyatta.com >> http://mailman.vyatta.com/mailman/listinfo/vyatta-users >> > ------ This mail has been sent through DS2 mail server _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
