Hi! I am working with Vyatta for the first time and I am currently stuck on what to do. I've googled a few howtos and also watched the videos and read the quick start. Here is my hardware/routing info:
Comcast SMC IP Gateway 1U dual m-itx VIA EK 10000 with 2 Compact Flash, 2 80G SATA, 2 512MB ram, 2 RJ45 10/100 per mobo (planning for VRRP down the road). eth0 = lan eth1 = wan Server 1 - Fedora 7 Server 2 - Fedora 7 IP info: Static IP block: 75.145.xxx.185 - 75.145.xxx.189 Gateway: 75.145.xxx.190 Subnet: 255.255.255.248 DNS 1: 68.87.73.242 DNS 2: 68.87.71.226 SMC IP: 10.1.10.1 Server 1: 192.168.xxx.189 Server 2: 192.168.xxx.188 Current Vyatta Config: protocols { static { disable: false route 0.0.0.0/0 { next-hop: 10.1.10.1 metric: 1 } } } policy { } interfaces { restore: false loopback lo { description: "" } ethernet eth0 { disable: false discard: false description: "lan" hw-id: 00:40:63:ef:c3:1c duplex: "auto" speed: "auto" address 192.168.xxx.1 { prefix-length: 24 disable: false } } ethernet eth1 { disable: false discard: false description: "wan" hw-id: 00:40:63:ef:c3:19 duplex: "auto" speed: "auto" address 75.145.xxx.189 { prefix-length: 29 disable: false } } } service { webgui { http-port: 80 https-port: 443 } } firewall { log-martians: "enable" send-redirects: "disable" receive-redirects: "disable" ip-src-route: "disable" broadcast-ping: "disable" syn-cookies: "enable" } system { host-name: "rt1" domain-name: "" name-server 68.87.73.242 name-server 68.87.71.226 time-zone: "GMT" ntp-server "69.59.150.135" gateway-address: 10.1.10.1 login { user root { full-name: "" authentication { encrypted-password: "$1$$Ht7gBYnxI1xCdO/JOnodh." } } user vyatta { full-name: "" authentication { encrypted-password: "$1$$Ht7gBYnxI1xCdO/JOnodh." } } } package { auto-sync: 1 repository community { component: "main" url: "http://archive.vyatta.com/vyatta" } } } I can currently ping my lan, which is further confirmed by being able to access Vyatta through Server1 via the WebGUI, but I cannot seem to configure the router correctly to ping the internet from the router. My thought is that my static route might not be correctly set, or possibly my default gateway. Seems one of them should point to 10.1.10.1 and the other to 75.145.xxx.190. Also, once I have set a static route under protocols I am noticing that I get an error whenever I attempt to edit it... Error - 102 Command failed cannot replace route for 0.0.0.0/0: no such route. Thanks! Todd Worden Software Developer Growing Technologies P: 434-296-1500 E: [EMAIL PROTECTED] _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users