Hi, I'm very new to Vyatta (and routing) and I could use some help setting up basic LAN routing between 2 subnets. I have the following configuration: eth0: 192.168.0.254 eth1: 192.168.1.254 each interface has a switch connected to it and each switch has a number of end nodes attached. I can ping nodes in each subnet from the other subnet, so the forwarding is working between the interfaces - but I don't understand why!! :-) I have been trying to follow the instructions in the Quick Start Guide,
(Configuring Routing Protocols) to set up rip. I used these commands: set protocols rip interface eth0 address 192.168.0.254 set protocols rip interface eth1 address 192.168.1.254 but I don't know how to set up policies. What further steps do I need to take to get rip configured correctly? Thanks in advance, Denis -- Denis Grannell, Kapuzinerstr. 45, D-80469 Muenchen _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
