I'm not sure if the version you're using has the disable-vmac option, but
if not try searching the archives for how to disable it.

stig

> Ken,
>
> You might have seen the vrrp priority of 150 for eth2 on R2 which was
> just a test and replaced with 20 since a few days, but the problem still
> exists.
>
> Anyone else? ;-)
>
> Cheers
> Tobias
>
> Ken Rozinsky schrieb:
> > Hello,
> >
> > I'm in no way an expert but it looks to me like the priority on both
> > your eth2 interfaces are set at 150.
> > setting the second to 20 might fix it for you.
> >
> > Regards,
> > Ken
> >
> >
> >
> > Tobias Orlamuende wrote:
> >> Yes, all interfaces are GBit, but connected to a 100 MBit/s switch.
> >> Interfaces are Intel 82571EB and 82573E/82573L
> >> /var/log/messages prints only errors like these ones:
> >>
> >> Feb 25 13:34:24 localhost kernel: ll header:
> >> ff:ff:ff:ff:ff:ff:00:00:5e:00:01:04:08:06
> >> Feb 25 13:35:25 localhost kernel: printk: 7 messages suppressed.
> >> Feb 25 13:35:25 localhost kernel: martian source 78.138.64.54 from
> >> 78.138.64.71, on dev eth0
> >> Feb 25 13:35:25 localhost kernel: ll header:
> >> ff:ff:ff:ff:ff:ff:00:00:5e:00:01:04:08:06
> >> Feb 25 13:35:25 localhost kernel: martian source 78.138.64.54 from
> >> 78.138.64.71, on dev eth2
> >> Feb 25 13:35:25 localhost kernel: ll header:
> >> ff:ff:ff:ff:ff:ff:00:00:5e:00:01:04:08:06
> >> Feb 25 13:35:25 localhost kernel: martian source 78.138.64.74 from
> >> 78.138.64.71, on dev eth0
> >> Feb 25 13:35:25 localhost kernel: ll header:
> >> ff:ff:ff:ff:ff:ff:00:00:5e:00:01:04:08:06
> >> Feb 25 13:35:25 localhost kernel: martian source 78.138.64.74 from
> >> 78.138.64.71, on dev eth2
> >> Feb 25 13:35:25 localhost kernel: ll header:
> >> ff:ff:ff:ff:ff:ff:00:00:5e:00:01:04:08:06
> >>
> >> Cheers
> >>
> >> Tobias
> >>
> >> Dave Strydom schrieb:
> >>
> >>> are all the interfaces 1000Mbit interfaces?
> >>> and
> >>> if you login to the routers as root, what do you have in
> /var/log/messages ?
> >>>
> >>> - Dave
> >>>
> >>> On Mon, Feb 25, 2008 at 12:54 PM, Tobias Orlamuende
> >>> <[EMAIL PROTECTED]> wrote:
> >>>
> >>>> Hi all,
> >>>>
> >>>>  I set up 2 routers with VC3 and want them to do vrrp. Setup of
vrrp
> was
> >>>>  done exactly as described in the documentation.
> >>>>  Unfortunately vrrp doesn't seem to work properly. On both routers
> vrrp
> >>>>  seems to act as a master. When connecting to one of the physical
> >>>>  addresses of one of the routers, I get packetloss of about 50%.
The
> >>>>  other router is fine as well as their virtual IP.
> >>>>
> >>>>  My setup looks as follows:
> >>>>
> >>>>  Upstream via a small transfer-net 83.220.149.16/29 (eth0)
> >>>>  The following networks are received through this transfer-net:
> >>>>  194.8.86.0/24 (eth2)
> >>>>  78.138.64.0/25 (eth1)
> >>>>  Default-route points to our upstream-provider's router
> (83.220.149.17)
> >>>>
> >>>>  Router1:
> >>>>
> >>>>  [EMAIL PROTECTED] show interfaces
> >>>>      loopback lo {
> >>>>      }
> >>>>      ethernet eth0 {
> >>>>          description: "upstream"
> >>>>          hw-id: 00:15:17:39:b6:8a
> >>>>          address 83.220.149.19 {
> >>>>              prefix-length: 29
> >>>>              broadcast: 83.220.149.23
> >>>>          }
> >>>>          vrrp {
> >>>>              vrrp-group: 3
> >>>>              virtual-address: 83.220.149.18
> >>>>              authentication: "123456"
> >>>>              priority: 150
> >>>>          }
> >>>>      }
> >>>>      ethernet eth1 {
> >>>>          description: "old-PA"
> >>>>          hw-id: 00:15:17:39:b6:8b
> >>>>          address 78.138.64.71 {
> >>>>              prefix-length: 25
> >>>>              broadcast: 78.138.64.127
> >>>>          }
> >>>>          vrrp {
> >>>>              vrrp-group: 4
> >>>>              virtual-address: 78.138.64.1
> >>>>              priority: 150
> >>>>          }
> >>>>      }
> >>>>      ethernet eth2 {
> >>>>          description: "old-local"
> >>>>          hw-id: 00:30:48:91:96:06
> >>>>          address 194.8.86.1 {
> >>>>              prefix-length: 24
> >>>>              broadcast: 194.8.86.255
> >>>>          }
> >>>>          vrrp {
> >>>>              vrrp-group: 2
> >>>>              virtual-address: 194.8.86.254
> >>>>              priority: 150
> >>>>          }
> >>>>      }
> >>>>      ethernet eth3 {
> >>>>          hw-id: 00:30:48:91:96:07
> >>>>      }
> >>>>
> >>>>  [edit]
> >>>>
> >>>>  [EMAIL PROTECTED]> show vrrp
> >>>>  Physical interface: eth0, Address: 83.220.149.19
> >>>>    Interface state: up, Group: 3, State: master
> >>>>    Priority: 150, Advertisement interval: 1s, Authentication type:
> simple
> >>>>    Preempt: yes, VIP count: 1, VIP: 83.220.149.18
> >>>>    Advertisement timer: 3310s, Master router: 83.220.149.19
> >>>>    Virtual MAC: 00:00:5E:00:01:03
> >>>>
> >>>>  Physical interface: eth1, Address: 78.138.64.71
> >>>>    Interface state: up, Group: 4, State: master
> >>>>    Priority: 150, Advertisement interval: 1s, Authentication type:
> none
> >>>>    Preempt: yes, VIP count: 1, VIP: 78.138.64.1
> >>>>    Advertisement timer: 3310s, Master router: 78.138.64.71
> >>>>    Virtual MAC: 00:00:5E:00:01:04
> >>>>
> >>>>  Physical interface: eth2, Address: 194.8.86.1
> >>>>    Interface state: up, Group: 2, State: master
> >>>>    Priority: 150, Advertisement interval: 1s, Authentication type:
> none
> >>>>    Preempt: yes, VIP count: 1, VIP: 194.8.86.254
> >>>>    Advertisement timer: 3310s, Master router: 194.8.86.1
> >>>>    Virtual MAC: 00:00:5E:00:01:02
> >>>>
> >>>>  Router2:
> >>>>
> >>>>  [EMAIL PROTECTED] show interfaces
> >>>>
> >>>>  loopback lo {
> >>>>      }
> >>>>      ethernet eth0 {
> >>>>          description: "upstream"
> >>>>          hw-id: 00:15:17:39:b2:8c
> >>>>          address 83.220.149.20 {
> >>>>              prefix-length: 29
> >>>>              broadcast: 83.220.149.20
> >>>>          }
> >>>>          vrrp {
> >>>>              vrrp-group: 3
> >>>>              virtual-address: 83.220.149.18
> >>>>              authentication: "123456"
> >>>>              priority: 20
> >>>>          }
> >>>>      }
> >>>>      ethernet eth1 {
> >>>>          description: "old-PA"
> >>>>          hw-id: 00:15:17:39:b2:8d
> >>>>          address 78.138.64.72 {
> >>>>              prefix-length: 25
> >>>>              broadcast: 78.138.64.127
> >>>>          }
> >>>>          vrrp {
> >>>>              vrrp-group: 4
> >>>>              virtual-address: 78.138.64.1
> >>>>              priority: 20
> >>>>          }
> >>>>      }
> >>>>      ethernet eth2 {
> >>>>          description: "local"
> >>>>          hw-id: 00:30:48:91:90:ee
> >>>>          address 194.8.86.2 {
> >>>>              prefix-length: 24
> >>>>              broadcast: 194.8.86.255
> >>>>          }
> >>>>          vrrp {
> >>>>              vrrp-group: 2
> >>>>              virtual-address: 194.8.86.254
> >>>>              priority: 150
> >>>>          }
> >>>>      }
> >>>>      ethernet eth3 {
> >>>>      hw-id: 00:30:48:91:90:ef
> >>>>      }
> >>>>
> >>>>  [edit]
> >>>>
> >>>>  [EMAIL PROTECTED]> show vrrp
> >>>>  Physical interface: eth0, Address: 83.220.149.20
> >>>>    Interface state: up, Group: 3, State: master
> >>>>    Priority: 20, Advertisement interval: 1s, Authentication type:
> simple
> >>>>    Preempt: yes, VIP count: 1, VIP: 83.220.149.18
> >>>>    Advertisement timer: 526s, Master router: 83.220.149.20
> >>>>    Virtual MAC: 00:00:5E:00:01:03
> >>>>
> >>>>  Physical interface: eth1, Address: 78.138.64.72
> >>>>    Interface state: up, Group: 4, State: master
> >>>>    Priority: 20, Advertisement interval: 1s, Authentication type:
> none
> >>>>    Preempt: yes, VIP count: 1, VIP: 78.138.64.1
> >>>>    Advertisement timer: 526s, Master router: 78.138.64.72
> >>>>    Virtual MAC: 00:00:5E:00:01:04
> >>>>
> >>>>  Physical interface: eth2, Address: 194.8.86.2
> >>>>    Interface state: up, Group: 2, State: master
> >>>>    Priority: 20, Advertisement interval: 1s, Authentication type:
> none
> >>>>    Preempt: yes, VIP count: 1, VIP: 194.8.86.254
> >>>>    Advertisement timer: 526s, Master router: 194.8.86.2
> >>>>    Virtual MAC: 00:00:5E:00:01:02
> >>>>
> >>>>  Does anybody have an idea what is going wrong here or where to
have
> a
> >>>>  closer look for fixing it?
> >>>>
> >>>>  Thanks in advance!
> >>>>  Greetings
> >>>>  Tobias
> >>>>
> >>>>  --
> >>>>  Mit freundlichen Gruessen / kind regards
> >>>>
> >>>>  Tobias Orlamünde
> >>>>
> >>>>  Emporis GmbH
> >>>>  Robert-Bosch-Strasse 7
> >>>>  D-64293 Darmstadt
> >>>>  Germany
> >>>>
> >>>>  Tel +49(0)6151 500170
> >>>>  Fax +49(0)6151 5001799
> >>>>  E-Mail [EMAIL PROTECTED]
> >>>>  http://corporate.emporis.com
> >>>>
> >>>>  [Emporis is one of the world's leading providers of
building-related
> >>>>  information]
> >>>>  _______________________________________________
> >>>>  Vyatta-users mailing list
> >>>>  Vyatta-users@mailman.vyatta.com
> >>>>  http://mailman.vyatta.com/mailman/listinfo/vyatta-users
> >>>>
> >>>>
> >>> _______________________________________________
> >>> Vyatta-users mailing list
> >>> Vyatta-users@mailman.vyatta.com
> >>> http://mailman.vyatta.com/mailman/listinfo/vyatta-users
> >>>
> >>
> >
> > _______________________________________________
> > Vyatta-users mailing list
> > Vyatta-users@mailman.vyatta.com
> > http://mailman.vyatta.com/mailman/listinfo/vyatta-users
>
> --
> Mit freundlichen Gruessen / kind regards
>
> Tobias Orlamünde
>
> Emporis GmbH
> Robert-Bosch-Strasse 7
> D-64293 Darmstadt
> Germany
>
> Tel +49(0)6151 500170
> Fax +49(0)6151 5001799
> E-Mail [EMAIL PROTECTED]
> http://corporate.emporis.com
>
> [Emporis is one of the world's leading providers of building-related
> information]
> _______________________________________________
> Vyatta-users mailing list
> Vyatta-users@mailman.vyatta.com
> http://mailman.vyatta.com/mailman/listinfo/vyatta-users

_______________________________________________
Vyatta-users mailing list
Vyatta-users@mailman.vyatta.com
http://mailman.vyatta.com/mailman/listinfo/vyatta-users

Reply via email to