Thanks for the reply. Do you know if it is possible to specify this in the Vyatta configuration so that you don't need to reconfigure it each time? -CH
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Justin Fletcher Sent: Tuesday, March 04, 2008 11:16 AM To: [EMAIL PROTECTED] Subject: Re: [Vyatta-users] Cluster heartbeat / change to ucast? Yes, you can edit the configuration directly; however, you'll need to modify it again on reboot as it's created from the Vyatta configuration. Best, Justin On Tue, Mar 4, 2008 at 4:43 AM, Chad Hurley <[EMAIL PROTECTED]> wrote: > > > > > The heartbeat from my Vyatta cluster is creating errors on another cluster > on my network. I would like to change the default bcast heartbeat to ucast. > Does anyone know if it is save to edit the following file directly without > any adverse affects? > > > > File: > > /etc/ha.d/ha.cf > > > > Current config: > > keepalive 1 > > deadtime 4 > > warntime 2 > > initdead 120 > > logfacility daemon > > bcast eth0 eth1 > > auto_failback off > > node riv1 riv2 > > ping 192.168.5.3 192.168.0.221 > > respawn hacluster /usr/lib/heartbeat/ipfail > > > > I would like to replace the bcast line with: > > ucast eth0 192.168.5.5 > > ucast eth1 192.168.0.252 > > > > Anyone had luck with this type of config? > > > > Thanks, > > Chad > > > > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users