Bob In some, perhaps all, models of Mac there is a little red button called the CUDA switch/button (I think or maybe CUBA). After replacing the battery you may need to press this button to get everything running again - it has happened to me with the same symptoms.
If you don't know what I'm talking about, check out the picture of your model's motherboard in the Apple knowledge base. That's where I found mine when it was the TIL. Good luck with it. Regards Greg on 12/6/02 3:50 PM, Bob Howells at [EMAIL PROTECTED] wrote: > Hi All, > > I need a little help............... > > LC630 worked in March, ok, sat on the floor here while I was away, > > Now press the keyboard power < and nothing happens. > > Expect the battery possibly the problem because it is quite old. > > Replace Battery and No difference. > > Try leaving everything off with battery disconnected for over 12 hours > and then reconnect but still No Action. > > NO FAN, NO HARD Drive, NO Floppy Drive. > > Replaced Power Cord and Keyboard with known good units. > > Does not seem reasonable that Power Unit should stop > while it has been unplugged from mains for only 3 months. > > Still thinking cause is associated with PRAM or the likes ! > > SUGGESTIONS PLEASE > > Bob > > -- The WA Macintosh User Group Mailing List -- > Archives - <http://www.wamug.org.au/mailinglist/archives.html> > Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.html> > Unsubscribe - <mailto:[EMAIL PROTECTED]> > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
