On Jan 9, 2004, at 4:34 PM, Stewart Woods wrote:
Hi all,
woke this morning to find all computers turned off - so it looks like
we had a power cut.
All are fine except my Quicksilver g4 - press the power-up button and
it lights for a couple of seconds then nothing........:-(
All computers were surge protected (though somewhat cheaply)
The machine is still under Applecare but wondered how this sounds to
the list before I heave it up to Nedlands.
could this get ugly?
cheers
Stewart
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[EMAIL PROTECTED]>
WAMUG is powered by Stalker CommuniGatePro
You could try reset the CODA chip on the logic board. Remove the
battery and power cord, wait for 10-15 minutes and then press the
little red button (should be close to where the battery was. That
hopefully will solve you problem.
Geoffrey Stormzand
storm.Consulting
702.493.9400
Las Vegas, NV USA
http://mac.stormconsultingLV.com
