just buy a string line level that wayu yo have string for those handy
things and a spirit leve; for what you want
On 09/06/2004, at 5:22 PM, Kathy Quinlan wrote:
Mark Secker wrote:
Mark,
Why not buy a couple of cheap spirit levels from your favourite
hardware
store. Line levels are about $2-5 (and are probably sourced from
that very
factory in China - love the Chinglish translation). Pull the spirit
levels
apart to get the tubes then mount them in some hobby acrylic on a
known
level surface to calibrate, then put some double sided tape on the
base.
Should be all done for less than $12.
Alternatively, find a mate with a broken spirit level and use that
for
because the smallest spirit level I could find vial was still at
least 2 1/2 cm long and 4 or 5 mm diameter and these blister levels
are only about 4mm across and only about 2 mm high and most are built
in to long levels are glass.
though using full size vials would add a certain Bladerunner'esque
retrofit appearance to a digital camera. ;)
and what's wrong with their engerrish... it's better than mine and
it's my first language :)
Their English is better than my Chinese ;o)
if you want the ultimate in level I can sell you a few linear sensors
that will give you spot on level only cost $1K each lol (they are mil
spec)
Regards,
Kat.
Todays Quote:
What is wrong with an internet toilet ?
--
---------------------------------------------------------------
K.A.Q. Electronics Website: www.kaqelectronics.dyndns.org
IM: Yahoo: PinkyDwaggy MSN: [EMAIL PROTECTED]
For Everything Electronics Phone: 0419 923 731
---------------------------------------------------------------
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[EMAIL PROTECTED]>
WAMUG is powered by Stalker CommuniGatePro
