On 5/07/2005 2:32 PM, "thefrogs" <[EMAIL PROTECTED]> wrote:
> I have just managed to get an iMac 333 up and running but I get a > blue screen with a command line indicating a boot failure. > Otherwise I can get a screen up for about one and a half minutes > before it blanks out. > The Drive is good. I can hear the CD spinning and loading but I > cannot see what 's happening. > After the Commandline there is a prompt but I have no idea what > should go next. > I have another drive with system 10 on do I load up unix to test the > screen/video ram itsself > tom samson > Hi Tom If you type "mac-boot" it should carry on like normal. Then you should be able to carry on and do everything else. If that doesn't work email back and the next thing you can do is reset the Open Firmware (not a nice thing to do all the time.) Hope the above helps. (Once you have it working make sure to see if there is any firmare upgrade that needs to be done.) Kind Regards Daniel --- Daniel Kerr MacWizardry Phone: 0414 795 960 Email: <[EMAIL PROTECTED]> Web: <http://www.macwizardry.com.au> **For everything Macintosh**
