I am having a problem doing a monitor calibration with my Spyder,
which I have used with no problems for many moons. Everything goes
normally until the last stage, where I am asked to save the profile.
At this point it comes up with an error
[-48FFFFFFDO/utils.c/986]
If I "OK" the error to clear it it comes back with a message that the
calibration was completed and the profile created - but of course I
have no saved file.
ColorVision suggested a) that the Spyder must be plugged directly
into a USB port, not into a powered hub or b) that Sleep and Screen
Saver need to be set to "never". Predictably, these make no
difference, as my normal setup has worked many times in the past.
The only difference I am aware of is that this is the first
reprofiling since going up to 10.4.3 from 10.4.2. Both Optical and
Precal are at the latest versions and, apart from this one sticking
point, function perfectly.
Have any other Spyders out there anything to offer please, I am not
happy with a monitor overdue for reprofiling!
Severin Crisp
________________________________________________________
Assoc Professor R Severin Crisp, FIP, CPhys, FAIP
15 Thomas St, Mount Clarence, Albany, 6330, Western Australia.
Phone (08) 9842 1950 (Int'l +61 8 9842 1950)
email mailto:[EMAIL PROTECTED]
Web pages http://www.JennyCrisp.com.au
& http://members.westnet.com.au/Crisp
________________________________________________________
