I have updated my scripts by installing firewatir and flashwatir. So is there any "Button" click method that i can use to click on the flash button, if yes then please provide the detail method.
Thanks in advance. On Mon, May 16, 2011 at 6:26 AM, Super Kevy <[email protected]>wrote: > Well why didn't you say the control was a flash control. > I cannot be expected to understand your problem if you represent it > incorrectly > Flash is not supported. > > > > On May 14, 3:18 am, sumit kumar <[email protected]> wrote: > > Hi Super kevy, > > > > Thanks for your help. However the points mentioned above did not work > here > > because of the following point:- > > > > --> There is no text field prior to the file upload element where i can > set > > the file name. > > > > Coding of the button which is reflected using firebug is displayed > below:- > > > > <object id="----" type="-----" data="----"> (Note:- Here a flash > file > > is embedded like "plugins/application/flash.swf") > > <param name = "----" value = "----"> > > <param name = "----" value = "----"> > > <param name = "----" value = "----"> > > </object> > > > > Here object tag represent the button "Upload File" button and if you > click > > on it a pop-up will display. > > > > Also i try the button click method as:--- > > button(:xpath,"xpath of the object tag").click > > then function of button click gets executed properly however the pop-up > to > > upload file didn't show up. > > > > Please help on this as it is urgently required. > > > > Thanks in advance... > > > > On Fri, May 13, 2011 at 8:55 AM, Super Kevy > > <[email protected]>wrote: > > > > > > > > > Hope this helps > > > > > First: HTML for a file upload field will resemble something like this > > > where the attribute "type" dictates that its a file upload file. A > > > built-in attribute of the input is that it will automatically give you > > > the "BROWSE" button > > > <input tabindex="101" name="uploadfile" size="30" maxlength="" > > > onchange="setvalue(this);" value="" type="file"> > > > > > To click the file upload button all you need to do is click in the > > > field or the button. It can be done using autoIT. > > > 1. Assume the name of the file upload element is 'uploadfile' and > > > there is a text_field (with the id sample) prior to it which is > > > exactly 1 tab click from it. > > > 2. Set focus to the field immediately before the 'uploadfile' by using > > > standard WATIR ie.text_field(:id,'sample').click. (See sample code > > > below) > > > 3. Next using autoIT TAB to the next field ('uploadfile) and press > > > ENTER to open the popup > > > 4. Run the popup form fill using AutoIT > > > 5. Return to the main and continue > > > > > Step 1 Set Focus to the element 1 Tab keypress before the file upload > > > element > > > myAutoIT = WIN32OLE.new("AutoitX3.Control") > > > ie.text_file(:id,"Sample").click # SET FOCUS TO field 1 tab click > > > before uploadfile element > > > > > Step 2. Use TAB and ENTER Keys to move to the upload input and open > > > the POPUP > > > myAutoIT.Send("{TAB}") # Tab to the upload field > > > myAutoIT.Send("{ENTER}") # Press the enter key to open the popup > > > > > Step 3. The POPUP is Open so fill it in with what we want > > > myAutoIT.WinWaitActive("File Upload","",15) # Set focus to the > > > popup > > > myAutoIT.Send("{ALT}n") # Move to the file name field in the popup > > > myAutoIT.Send(sFileName) # Enter the Path and File Name > > > myAutoIT.ControlClick("File Upload","","&Open") > > > > > Step 4. Back in the main application > > > ... etc > > > > > On May 12, 1:07 pm, sumit kumar <[email protected]> wrote: > > > > Hi Super Kevy, > > > > > > Thanks for your help. Please ignore the above mentioned query which i > > > > have posted as i was doing it wrongly at my end. > > > > > > Please see below the updated query:----- > > > > > > There is no file field where i can set the value of the uploaded > > > > file....... > > > > In this case there is only a button and if user click that button > then > > > > "File Upload dialog" box gets opened. > > > > The problem in this case which i am facing is:- > > > > ----- I am unable to click on the button using any property and the > > > > "File Upload Dialog" box did not appear. > > > > Details: <object> tag is used to create the button and a flash file > is > > > > uploaded in it......... > > > > So is there any way from which i can click on it and "File Upload > > > > Dialog" box appear correctly.... > > > > > > Thanks in advance...... > > > > > > On May 12, 6:27 am, Super Kevy <[email protected]> > wrote: > > > > > > > The preferred method is to use the file_field, but this is an > > > > > alternative > > > > > BTW: What error are you getting when you try to set using > file_field? > > > > > > > Basic AutoIT sample > > > > > ie.text_field(:id,'document_name').click # Open the popup > > > > > myAutoIT = WIN32OLE.new("AutoitX3.Control") > > > > > myAutoIT.WinWaitActive("File Upload","",15) # Set focus to the > > > > > popup > > > > > ##myAutoIT.ControlSetText("File Upload","",1148,sFileName) # > 1148 > > > > > is the id found by the AutoIt Finder/Didnt work > > > > > myAutoIT.Send("{ALT}n") # Move to the file name field in the > popup > > > > > myAutoIT.Send(sFileName) # Enter the Path and File Name > > > > > myAutoIT.ControlClick("File Upload","","&Open") > > > > > > > On May 2, 4:36 pm, chaand <[email protected]> w > > > > > > > On May 12, 3:09 am, sumit kumar <[email protected]> wrote: > > > > > > > > Ok, my problem is to do with handling a windows ***file upload > dialog > > > box*. > > > > > > > > I'm trying to write some code that will click the *file upload* > > > button, > > > > > > navigate to path where the file is stored and after selecting a > file > > > click > > > > > > "Open" button of the* file upload dialog box*. > > > > > > ie.button(:id, "_______").click_no_wait > > > > > > ie.send_keys("c:\__________") > > > > > > ie.send_keys("{ENTER}") > > > > > > > > Unfortunately click_no_wait just flashes the *dialog box and > *does > > > not pop > > > > > > up the Dialog Box. I've tried click by itself and that opens the > > > *dialog box > > > > > > * but the rest of the script does not execute. > > > > > > > > In this case i cannot use the file upload method:- > > > > > > $ie.file_field(:name, "").set("your file.txt") > > > > > > As there is no text field for setting the file name in the > textboxes. > > > > > > > > Application Functionality:- > > > > > > There is "Select File" button and on clicking it, shows "File > Upload" > > > Dialog > > > > > > box and if user select a file and press enter the file > automatically > > > starts > > > > > > uploading.... > > > > > > > > Any Ideas on this?- Hide quoted text - > > > > > > - Show quoted text - > > > > > -- > > > Before posting, please readhttp://watir.com/support. In short: search > > > before you ask, be nice. > > > > > [email protected] > > >http://groups.google.com/group/watir-general > > > [email protected]< > http://groups.google.com/group/watir-general%0Awatir-general+unsubscr...>- > Hide quoted text - > > > > - Show quoted text - > > -- > Before posting, please read http://watir.com/support. In short: search > before you ask, be nice. > > [email protected] > http://groups.google.com/group/watir-general > [email protected]<http://groups.google.com/group/watir-general%[email protected]> > -- Before posting, please read http://watir.com/support. In short: search before you ask, be nice. [email protected] http://groups.google.com/group/watir-general [email protected]
