https://bugs.freedesktop.org/show_bug.cgi?id=98689
--- Comment #7 from Alex Corcoles <[email protected]> ---
Thanks,
> you can use the property names directly, not the numbers. that's a lot more
> portable across reboots. all the "* Default" and "* Available" properties are
> read-only, so you can't change them.
Ah, good to know.
> Changing the coordinate transformation matrix is intended for mainly device
> rotation, using it for acceleration is not recommended.
I guessed so- still it's quite workable as a temporary solution
> Run libinput-debug-events --verbose and see if the "Device '<device name>'
> set to const acel ..." shows up. If not, then the property isn't recognised
> correctly which would explain why it isn't working.
It does print out:
Device 'ETPS/2 Elantech TrackPoint' set to const accel 2.00
> Also, please attach an evemu-record recording of the trackpoint as you try to
> push the cursor into the top-right corner with "normal pressure". [that's
> also the biggest issue we face with trackpoint acceleration, who knows what
> "normal pressure" is...]
Got it. Seems to oscillate (1..2, -1..-2).
--
You are receiving this mail because:
You are the assignee for the bug.
_______________________________________________
wayland-bugs mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/wayland-bugs
