Thanks! For what it's worth, weston-launch isn't actually in the package you get right now, due to comedy version number mishaps (first forgetting how Debian deals with date numbering, then the person with the board I asked to fix it forgetting that it was now 2013 and not 2012), but that'll be fixed tomorrow I expect.
On 4 June 2013 16:52, <[email protected]> wrote: > Thanks, pushed. > > On 06/04, [email protected] wrote: >> From: Pekka Paalanen <[email protected]> >> >> Also mention, that using the user 'pi' should save from pain of setting >> up permissions for devices. Run apt-get update, too. >> >> Signed-off-by: Pekka Paalanen <[email protected]> >> Cc: Daniel Stone <[email protected]> >> Cc: Alex Bradbury <[email protected]> >> --- >> raspberrypi.html | 34 ++++++++++++++++++++++++++++++++-- >> 1 file changed, 32 insertions(+), 2 deletions(-) >> >> diff --git a/raspberrypi.html b/raspberrypi.html >> index b1c2a87..44d9ce4 100644 >> --- a/raspberrypi.html >> +++ b/raspberrypi.html >> @@ -14,7 +14,35 @@ >> >> <p>This is a guide for installing Weston into >> <a href="http://www.raspberrypi.org/";>Raspberry Pi</a>. All commands and >> -compiling are done directly on the Pi.</p> >> +compiling are done directly on the Pi. In Raspbian, it is recommended to >> +run Weston as the user 'pi', as Raspbian seems to allow input device access >> +mostly for this user while logged in locally (not via ssh).</p> >> + >> +<p>However, if you just want to try Weston and not build it, there are >> +packages.</p> >> + >> +<blockquote> >> +<h3>Raspbian packages</h3> >> + >> +<p>There are pre-built Wayland and Weston packages for the >> +<a href="http://www.raspbian.org/";>Raspbian</a> distribution.</p> >> + >> +<p>Add the following line to <tt>/etc/apt/sources.list</tt> file:</p> >> +<pre> deb http://raspberrypi.collabora.com wheezy rpi >> +</pre> >> +<p>Then just issue:</p> >> +<pre> sudo apt-get update >> + sudo apt-get install weston</pre> >> + >> +<p>This will install also a script called <tt>weston-launch</tt> >> +(not the real <tt>weston-launch</tt> program), which will automatically >> +set up <tt>XDG_RUNTIME_DIR</tt> for you and run <tt>weston</tt>. >> +Running Weston with this package is as simple as:</p> >> +<pre> weston-launch</pre> >> +<p>No need to manually set up environment variables. The firmware notes >> +below are still worth checking, though.</p> >> +</blockquote> >> + >> >> <h2>Build dependencies</h2> >> >> @@ -138,7 +166,9 @@ EGL. EGL does not work for clients due to EGL Wayland >> platform being >> unimplemented on Raspberry Pi.</p> >> >> <p>Weston should work by running <tt>weston</tt>. Remember to have the >> -environment set up.</p> >> +environment set up, and it is useful to have an ssh session open to your >> +RPi on the first try, in case Weston cannot open any input or output >> +devices. It is best to try as the user 'pi' on Raspbian.</p> >> >> <h2>Troubleshooting</h2> >> >> -- >> 1.8.1.5 >> > > -- > "All that is necessary for evil to triumph is for good men to do nothing" > - War and Peace (film series) > http://www.ChaosReigns.com > _______________________________________________ > wayland-devel mailing list > [email protected] > http://lists.freedesktop.org/mailman/listinfo/wayland-devel _______________________________________________ wayland-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/wayland-devel
