This test worked because on devices that don't use pressure the touches were
reset when BTN_TOUCH when to 0, triggering the 'ignore fake fingers when no
real fingers are down' behavior. But this is a different code path than the
pressure handling, so let's separate those tests.

Signed-off-by: Peter Hutterer <peter.hutte...@who-t.net>
---
 test/test-touchpad-tap.c | 63 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 60 insertions(+), 3 deletions(-)

diff --git a/test/test-touchpad-tap.c b/test/test-touchpad-tap.c
index a57677c2..948be965 100644
--- a/test/test-touchpad-tap.c
+++ b/test/test-touchpad-tap.c
@@ -1591,13 +1591,19 @@ START_TEST(touchpad_3fg_tap_quickrelease)
 }
 END_TEST
 
-START_TEST(touchpad_3fg_tap_hover_btntool)
+START_TEST(touchpad_3fg_tap_pressure_btntool)
 {
        struct litest_device *dev = litest_current_device();
        struct libinput *li = dev->libinput;
 
-       if (libevdev_get_abs_maximum(dev->evdev,
-                                    ABS_MT_SLOT) >= 2)
+       if (libevdev_get_abs_maximum(dev->evdev, ABS_MT_SLOT) >= 2)
+               return;
+
+       /* libinput doesn't export when it uses pressure detection, so we
+        * need to reconstruct this here. Specifically, semi-mt devices are
+        * non-mt in libinput, so if they have ABS_PRESSURE, they'll use it.
+        */
+       if (!libevdev_has_event_code(dev->evdev, EV_ABS, ABS_MT_PRESSURE))
                return;
 
        litest_enable_tap(dev->libinput_device);
@@ -1617,6 +1623,56 @@ START_TEST(touchpad_3fg_tap_hover_btntool)
         * third touch  */
        litest_event(dev, EV_ABS, ABS_MT_PRESSURE, 3);
        litest_event(dev, EV_ABS, ABS_PRESSURE, 3);
+       litest_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, 0);
+       litest_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, 1);
+       litest_event(dev, EV_SYN, SYN_REPORT, 0);
+       libinput_dispatch(li);
+
+       litest_push_event_frame(dev);
+       litest_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, 1);
+       litest_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, 0);
+       litest_pop_event_frame(dev);
+       litest_assert_empty_queue(li);
+
+       litest_touch_up(dev, 0);
+       litest_touch_up(dev, 1);
+}
+END_TEST
+
+START_TEST(touchpad_3fg_tap_hover_btntool)
+{
+       struct litest_device *dev = litest_current_device();
+       struct libinput *li = dev->libinput;
+
+       if (libevdev_get_abs_maximum(dev->evdev, ABS_MT_SLOT) >= 2)
+           return;
+
+       /* libinput doesn't export when it uses pressure detection, so we
+        * need to reconstruct this here. Specifically, semi-mt devices are
+        * non-mt in libinput, so if they have ABS_PRESSURE, they'll use it.
+        */
+       if (libevdev_has_event_code(dev->evdev, EV_ABS, ABS_MT_PRESSURE))
+               return;
+
+       if (libevdev_has_property(dev->evdev, INPUT_PROP_SEMI_MT) &&
+           libevdev_has_event_code(dev->evdev, EV_ABS, ABS_PRESSURE))
+               return;
+
+       litest_enable_tap(dev->libinput_device);
+       litest_enable_edge_scroll(dev);
+
+       litest_drain_events(li);
+
+       litest_touch_down(dev, 0, 50, 50);
+       litest_touch_down(dev, 1, 70, 50);
+       libinput_dispatch(li);
+
+       litest_touch_move_to(dev, 0, 50, 50, 50, 70, 10, 0);
+       litest_touch_move_to(dev, 1, 70, 50, 50, 70, 10, 0);
+       litest_drain_events(li);
+
+       /* drop below the pressure threshold in the same frame as starting a
+        * third touch  */
        litest_event(dev, EV_KEY, BTN_TOUCH, 0);
        litest_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, 0);
        litest_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, 1);
@@ -3317,6 +3373,7 @@ litest_setup_tests_touchpad_tap(void)
        litest_add("tap-3fg:3fg", touchpad_3fg_tap_tap_again, LITEST_TOUCHPAD, 
LITEST_SINGLE_TOUCH);
        litest_add("tap-3fg:3fg", touchpad_3fg_tap_quickrelease, 
LITEST_TOUCHPAD, LITEST_SINGLE_TOUCH);
        litest_add("tap-3fg:3fg", touchpad_3fg_tap_hover_btntool, 
LITEST_TOUCHPAD, LITEST_SINGLE_TOUCH);
+       litest_add("tap-3fg:3fg", touchpad_3fg_tap_pressure_btntool, 
LITEST_TOUCHPAD, LITEST_SINGLE_TOUCH);
        litest_add_for_device("tap-3fg:3fg", 
touchpad_3fg_tap_btntool_pointerjump, LITEST_SYNAPTICS_TOPBUTTONPAD);
        litest_add("tap-4fg:4fg", touchpad_4fg_tap, LITEST_TOUCHPAD, 
LITEST_SINGLE_TOUCH|LITEST_SEMI_MT);
        litest_add("tap-4fg:4fg", touchpad_4fg_tap_quickrelease, 
LITEST_TOUCHPAD, LITEST_SINGLE_TOUCH|LITEST_SEMI_MT);
-- 
2.14.3

_______________________________________________
wayland-devel mailing list
wayland-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/wayland-devel

Reply via email to