You can. In fact, if you take a look at Seasons, that's basically what's been done. However, it will only work with V3.9, not older versions.
-tk On Tue, Mar 12, 2019 at 5:36 PM Pat <[email protected]> wrote: > I knew it was a lowercase R, not sure why I decided to camelCase it here. > > Thanks for the update and fix. > > Side question that I may have missed in the threads. Should I remove the > Unit Groups from skin.conf and have them rely on weewx.conf's only? > > > On Tuesday, March 12, 2019 at 8:33:26 PM UTC-4, Tom Keffer wrote: >> >> The type 'windrun' (note the lower-case 'r') is part of group_distance, >> which was inadvertently left out of the set of groups that get switched >> when the user selects metric or US (it doesn't appear in any of the skins >> that are part of WeeWX). >> >> It is easily added. Go into weewx.conf, section [StdReports] / >> [[Defaults]] / [[[Units]]] / [[[[Groups]]]] and add it. For example, >> >> [[Defaults]] >> >> [[[Units]]] >> >> # The following section sets what unit to use for each unit >> group. >> # NB: The unit is always in the singular. I.e., >> 'mile_per_hour', >> # NOT 'miles_per_hour' >> [[[[Groups]]]] >> >> group_altitude = meter # Options are 'foot' or 'meter' >> group_degree_day = degree_C_day # Options are >> 'degree_F_day' or 'degree_C_day' >> group_pressure = mbar # Options are 'inHg', 'mmHg', >> 'mbar', or 'hPa' >> group_rain = mm # Options are 'inch', 'cm', or 'mm' >> group_rainrate = mm_per_hour # Options are >> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' >> group_speed = meter_per_second # Options are >> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' >> group_speed2 = meter_per_second2 # Options are >> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' >> group_temperature = degree_C # Options are 'degree_F' >> or 'degree_C' >> group_distance = km_per_hour >> >> I'll add it to the development branch. >> >> -tk >> >> On Tue, Mar 12, 2019 at 5:00 PM Pat <[email protected]> wrote: >> >>> In weewx 3.9.1 and when the windRun archive type is enabled, it's only >>> outputting miles when using $year.windrun.max, even when the skin is in >>> metric. >>> >>> Likewise, $unit.label.windRun is not returning anything in the skin. >>> >>> I haven't found a way to get the label to observe the Group labels. >>> >>> I'm still learning the generators, it's a slow process since it's in my >>> spare hobby time. My question is, how can windRun observe the skin metric >>> values? >>> >>>
